Horizon Hobby E-FLITE Night Radian 2.0m User Manual (English)

Questions and Answers:

L
Lauren PittsJul 29, 2025
Why is my Horizon Hobby E-FLITE Night Radian 2.0m Toy oscillating?
- P
  powellconnieJul 29, 2025
  Oscillation in your Horizon Hobby Toy can stem from several issues. It could be due to a damaged or imbalanced propeller or nose cone, requiring replacement or balancing. Motor vibration can also cause oscillation; try replacing parts, aligning the fan unit, and tightening fasteners. Other potential causes include a loose receiver (align and secure it in the fuselage), loose aircraft controls (tighten servo, arm, linkage, horn, and control surface), worn parts (replace propeller, nose cone, or servo), or irregular servo movement (replace the servo).
F
frussellAug 8, 2025
What to do if my Horizon Hobby Toy has inconsistent flight performance?
- C
  Charles GilesAug 8, 2025
  Inconsistent flight performance in your Horizon Hobby Toy can be caused by several factors. First, ensure that the trim is at neutral; if you've adjusted the trim more than 8 clicks, adjust the clevis to remove trim. Also, confirm that Sub-Trim is not in use and adjust the servo linkage instead. Finally, make sure the aircraft remained immobile for 5 seconds after the battery connection with the throttle stick in the lowest position. Disconnect and reconnect the battery, keeping the aircraft still for 5 seconds.
T
Tyler AlexanderAug 17, 2025
What to do if my Horizon Hobby E-FLITE Night Radian 2.0m Toy has an incorrect response to the AS3X Control Direction Test?
- J
  jay81Aug 17, 2025
  If your Horizon Hobby Toy shows an incorrect response during the AS3X Control Direction Test, do not fly it. This indicates incorrect direction settings in the receiver, which can cause a crash. Correct the direction settings.