Need help?Do you have a question about the Horizon Hobby timber and is the answer not in the manual?
General| Brand | Horizon Hobby |
|---|---|
| Model | timber |
| Category | Toy |
| Language | English |
Checklist for preparing the aircraft before flight.
Detailed instructions for setting up the transmitter for the aircraft.
Guidance on using dual rates for initial flights and landings.
Advice on adjusting expo for control response after initial flights.
Step-by-step instructions for installing the landing gear.
Instructions for assembling the suspension components.
Steps to attach the suspension assembly to the fuselage.
Instructions for installing the horizontal tail components.
Guide to connecting clevises to control horns.
Procedure for centering control surfaces after assembly and setup.
Instructions for assembling the aircraft wing.
Optional steps for installing the slat components on the wing.
Steps for attaching the wing to the fuselage.
Instructions for installing the optional float set.
Steps for assembling the optional float components.
Procedure for mounting the assembled float set to the fuselage.
Guide on how to install the bind plug for binding procedures.
Step-by-step guide to bind the aircraft and switch SAFE Select ON.
How to identify when SAFE Select is active and switched ON.
Procedure for binding the aircraft for AS3X only operation.
How to identify when SAFE Select is switched OFF.
Instructions for assigning a switch to control SAFE Select.
Recommendations and guidelines for selecting the flight battery.
Procedure for performing a radio system range test.
Troubleshooting guidance for aircraft oscillation during flight.
Instructions for taking off the aircraft.
General guidance for flying the aircraft.
Instructions for landing the aircraft.
Explanation of the Low Voltage Cutoff system and its function.
Information on repairing the aircraft using adhesives.
Specific instructions for water operations with the optional float set.
How SAFE Select technology affects flying characteristics.
Steps for installing the AR636 receiver.
Steps for disassembling the motor components.
Steps for assembling the motor components.
Details on what the product warranty includes.
Details on what the product warranty does not cover.
Explains the available remedies for warranty claims.
States limitations on Horizon Hobby's liability.
Governing law for the warranty terms.
How to get help and warranty support.
Procedure for sending the product for inspection or service.
Requirements needed to process a warranty claim.
Details on service for products not covered by warranty.
To Next Page