Hörmann FCT 10 User Manual

1
09.2006 TR20A002-A RE
Anleitung für Montage und Betrieb
Funkcodetaster FCT 10
Installation and operating instructions
FCT 10 Code Modulator
Notice de montage et d’installation
Clavier de codage FCT 10
Handleiding voor montage en bediening
Telecoderingsschakelaar FCT 10
Istruzioni per il montaggio e l’uso
Tastiera a radiocodice FCT 10
Instrucciones de montaje y de servicio
Pulsador codificado FCT 10
Bruksanvisning för montering och drift
Kodlås FCT 10
Instrukcja monta†u i u†ytkowania
Kodowy sterownik radiowy FCT 10
Szerélési és mu˝ködtetési útmutató
FCT 10 kódkapcsoló

Hörmann FCT 10 Specifications

General

Brand	Hörmann
Model	FCT 10
Category	Modulator
Language	English

Summary

General

Installation

Important terminology

Putting into operation and Changing the Battery

Normal Operation

Programming Functions

Functions for pre-setting device operations and programming modes.

Altering the IB code or entering a personal IB code

Procedure to change the master 8-digit code for unit security and access.

Entering or altering the access codes

Steps to add, change, or delete user-specific 2 to 6-digit access codes.

Deleting the access codes

Instructions for removing existing access codes from storage spaces.

Operating functions

Functions performed after setup, such as transmitting data or activating receivers.

Transmitting after entering an access code

How to send a radio code after successfully entering a valid access code.

Learning after entering an access code

Procedure for teaching the device new radio codes from a transmitter.

Recoding a radio code location with an access code or resetting this radio code location to the factory coding

How to overwrite or reset radio codes for specific locations.

Direct function of the "bell/light" key

Using the dedicated bell/light key for direct transmission or learning without an access code.

Transmitting using the "bell/light" key

How to transmit a radio code using the bell/light key directly.

Learning using the "bell/light" key

Teaching radio codes to the device via the bell/light key.

Recoding the radio code location of the "bell/light" key or resetting this radio code location to the factory coding

Recoding or resetting the bell/light key's associated radio code.

EU Manufacturer's Declaration