Need help?Do you have a question about the Hornby HM7000-8 and is the answer not in the manual?
General| Brand | Hornby |
|---|---|
| Model | HM7000-8 |
| Category | Media Converter |
| Language | English |
Steps to set up the HM7000 APP and link it to the decoder.
Overview of HM7000 decoders and their operation modes.
Highlights Bluetooth advantages and reasons against DC operation.
Details on Over-The-Air updates for firmware and sound.
Setting the decoder's primary address.
Sets BEMF compensation cut-out speed step.
Selects between DCC, DC, and Bluetooth modes.
Configuration for long decoder addresses.
General decoder configuration settings.
Settings for lighting effects and brightness.
Configures automatic spot sound playback.
Range of CVs for defining custom speed curves.
Enabling/disabling AFC for spot sound play.
Configuring horns and whistles for F2/F3.
Settings for 3- and 4-notch diesel sound playback.
Configuration for electric locomotive sound playback.
Configuration for electro-diesel sound playback.
Critical information on HFO current limits.
Information on tuning motor control algorithms.
Steps for the auto-calibration process.
Third stage for manual PID calibration.
To Next Page
