KBW/CR Version R1.0 140323 Take me back to Top…. Page 40 of 130
Non-Sound Decoders… Features and Functions
Non-sound decoders currently support 6 functions. See below.
The function allocated to each F# is fixed. Remapping of Function numbers is not supported.
Only 3 HFO connections are available… i.e HFO1 – HFO3
F0… Headlight/Rear light… HFO1 and HFO2 – (if installed.)
F1… Aux 1 (High level function output typically used for controlling LED lighting etc.) HFO3
F2… Not available….
F3… Not available….
F4… Not available….
F5… Activate Shunt mode.
F6… Activate “Creep Mode” … Coupling assistance.
F7… Apply Brake action (overrides current deceleration level.)
F8… Simple push button control of pre-set motor speed. (Speed set by CV124. Acceleration and Deceleration set by CV3 and CV4.)
To Next Page
Loading...
Need help?
General
