To Next PageTo Next PageWhat to do if my HORNER Touchscreen XL4/XL4 Prime OCS will not download the project file?
If your XL4/XL4 Prime OCS is not downloading the project file, ensure that the project file is saved as a .pgm file and not a .csp file. Also, the file's I/O configuration must match the XL4/XL4 Prime configuration for it to download correctly.
What to do if I get an unknown communication error on my HORNER HE-XC1E3?
If you encounter an unknown communication error, close Cscape, power cycle the controller, and then reopen Cscape with a blank project.
What to do if communication is not established to the HORNER Touchscreen target controller?
If communication isn't established with the HORNER Touchscreen target controller, verify the controller's node ID and ensure the Target setting matches it. Confirm that a local connection is established.
Why is Cscape unable to access the COM port of the PC for my HORNER HE-XC1E3 Touchscreen?
If Cscape can't access the COM port of your PC with HORNER Touchscreen, it might be configured for a COM port that's either not present or is being controlled by another program. Note that only one Cscape window can access a port at a time.
What to do if Cscape has accessed a PC COM port but is not communicating with the HORNER HE-XC1E3 controller?
If Cscape has accessed a PC COM port but isn't communicating with the HORNER Touchscreen controller, it typically means the controller isn't physically connected.
How to fix unknown communication error on HORNER Touchscreen?
To resolve an unknown communication error with your HORNER Touchscreen, close Cscape, power cycle the controller, and then reopen Cscape with a blank project.
What to do if XL4 OCS HORNER Control Panel will not download project file?
If your HORNER Control Panel XL4 OCS won't download the project file, ensure that the project file is saved as a .pgm file and not a .csp file and that the file's I/O configuration matches the XL4 configuration.
Why is Cscape unable to access the COM port of the PC for my HORNER Control Panel?
If Cscape can't access the PC COM port for your HORNER Control Panel, it might be configured for a COM port that isn't present, or another program might be controlling the port. Remember, only one Cscape window can access a port at a time; subsequent instances will show 'No Port'.
What to do if communication is not established to the target HORNER HE-XC1E3 controller?
If communication isn't established with the target controller, verify the controller's node ID and ensure the Target setting matches it. Also, confirm that a local connection is established.
What to do if Cscape has accessed a PC COM port but is not communicating with the HORNER Control Panel controller?
If Cscape has accessed a PC COM port but is not communicating with the HORNER Control Panel controller, this typically means that the controller is not physically connected.
General| Brand | HORNER |
|---|---|
| Model | HE-XC1E3 |
| Category | Touchscreen |
| Language | English |
Key safety warnings, hazard symbols, and general safety guidelines for product use.
Step-by-step instructions for installing the OCS unit into a panel.
Procedure for testing the effectiveness of ground connections.
Details on the primary power port, its pins, and connection requirements.
Introduction to the OCS system menu, navigation, and basic functions.
Detailed steps for navigating and editing system settings within the menu.
Features designed to maintain application operation during soft failures.
Explanation of different types of registers used in OCS programming.
Methods and steps for establishing communication with the OCS unit.
Configuring digital and High-Speed Counter (HSC) inputs.
Configuring digital and Pulse Width Modulation (PWM) outputs.
Setting up analog input channels, modes, and filtering.
Configuring analog output channels, modes, and stop behavior.
Details on solid-state digital output functionality, wiring, and protection.
Information regarding relay output functionality, life, and fusing.
Configuration and wiring for digital input modes (positive/negative logic).
Configuration and operation of analog input channels, including filtering.
Setup and capabilities of universal analog input channels.
Configuration and operation of analog output channels.
Detailed explanation of High-Speed Counter capabilities and modes.
Functionality and modes for the Totalize High-Speed Counter function.
How to measure pulse width using High-Speed Counter inputs.
Measuring signal period using High-Speed Counter inputs.
Using High-Speed Counter inputs for quadrature encoder measurement.
Functionality for matching register values to control High-Speed Outputs.
Overview of optional HSC tasks and their configuration.
Overview of high-speed output modes like PWM and Stepper.
Configuration parameters and functionality for the Stepper function.
Enabling and configuring digital filters for HSC inputs.
Using CAN for OCS programming and monitoring with Cscape.
Steps to configure the Ethernet module using Cscape software.
Setting up IP addresses, Net Mask, and Gateway for Ethernet.
Selecting and configuring communication protocols in Cscape.
Setting up network parameters like baud rate and timeouts.
How data is displayed and entered via the OCS interface.
Operations for backing up and restoring OCS data.
Configuring automatic loading of the AUTOLOAD.PGM application.
Enabling automatic transition to RUN mode after load/restore.
Methods and steps for performing firmware updates.
Detailed step-by-step guide for updating the OCS firmware.
Troubleshooting common connection issues between Cscape and the OCS.
Checklist for resolving serial port connection problems.
Checklist for resolving USB port connection problems.
Checklist for resolving Ethernet port connection problems.
Troubleshooting local controller and I/O related issues.
Troubleshooting steps for CsCAN network setup and issues.
Contact information for technical support and assistance.
