What to do if my HORNER HE-XC1E0 XL4/XL4 Prime OCS will not download the project file?
If your XL4/XL4 Prime OCS is not downloading the project file, ensure that the project file is saved as a .pgm file and not a .csp file. Also, the file's I/O configuration must match the XL4/XL4 Prime configuration for it to download correctly.
What to do if communication is not established to the target HORNER HE-XC1E0 Touchscreen controller?
If communication isn't established with the target controller, verify the controller's node ID and ensure the Target setting matches it. Also, confirm that a local connection is established.
What to do if I get an unknown communication error on my HORNER Touchscreen?
If you encounter an unknown communication error, close Cscape, power cycle the controller, and then reopen Cscape with a blank project.
What to do if communication is not established to the HORNER Touchscreen target controller?
If communication isn't established with the HORNER Touchscreen target controller, verify the controller's node ID and ensure the Target setting matches it. Confirm that a local connection is established.
Why is Cscape unable to access the COM port of the PC for my HORNER HE-XC1E0?
If Cscape can't access the COM port of your PC with HORNER Touchscreen, it might be configured for a COM port that's either not present or is being controlled by another program. Note that only one Cscape window can access a port at a time.
What to do if Cscape has accessed a PC COM port but is not communicating with the HORNER HE-XC1E0 Touchscreen controller?
If Cscape has accessed a PC COM port but isn't communicating with the HORNER Touchscreen controller, it typically means the controller isn't physically connected.
How to fix unknown communication error on HORNER Touchscreen?
To resolve an unknown communication error with your HORNER Touchscreen, close Cscape, power cycle the controller, and then reopen Cscape with a blank project.
What to do if XL4 OCS HORNER Control Panel will not download project file?
If your HORNER Control Panel XL4 OCS won't download the project file, ensure that the project file is saved as a .pgm file and not a .csp file and that the file's I/O configuration matches the XL4 configuration.
Why is Cscape unable to access the COM port of the PC for my HORNER Control Panel?
If Cscape can't access the PC COM port for your HORNER Control Panel, it might be configured for a COM port that isn't present, or another program might be controlling the port. Remember, only one Cscape window can access a port at a time; subsequent instances will show 'No Port'.
What to do if Cscape has accessed a PC COM port but is not communicating with the HORNER Control Panel controller?
If Cscape has accessed a PC COM port but is not communicating with the HORNER Control Panel controller, this typically means that the controller is not physically connected.
General| Resolution | 800 x 600 pixels |
|---|---|
| Touch Technology | Resistive |
| Operating System | Proprietary |
| Connectivity | Ethernet, Serial |
| Power Supply | 24 VDC |
| Display Type | TFT LCD |
| Ethernet | 10/100 Mbps |
| Enclosure Rating | IP65 |
| Colors | 65, 536 colors |
| Serial Ports | RS-232, RS-485 |
| Memory | 128 MB Flash |
| Operating Temperature | 0°C to 50°C |
| Communication Ports | Ethernet, Serial |
| Display Size | 10.4 inch |
To Next Page
