horsch Maestro CX - Page 93

Drill unit | 8
60013444 • 01 • 01/2021 • en 93
Mounting finger and spike
press wheels
The finger or spike press wheels are mounted offset to the rubber press rollers:
Direction of travel
2
2
1
1
3
1 Finger / spike press wheel
2 Fertiliser coulter
3 Rubber press roller
1. Attach the finger or spike press wheel (1) on the respective side of the fertiliser
coulter (2).
2. Attach the rubber press roller (3) offset to the rear toward the finger or spike
press wheel.
3. Mount the finger press wheel in the correct position. The fingers must be dir-
ected toward the rear in the direction of travel:
1
2
1 Correct
2 wrong