7
The programme times have been preset as shown in the chart below.
If any changes are required to the
programme times please complete
the operation as described in the
owchart left.
Setting the Holiday Mode
The holiday mode can be used to suspend the program function of the ChannelPlus
programmer, it can be set in advance of your departure date and for as long a period as
required. The holiday function operates from mid-day to mid-day, this means it can be
easily set to ensure your home is warm for your return. When the holiday mode has been
set a smiley face will appear on the display. When the holiday mode is active only the
day/date and smiley face will be displayed.
To cancel an active holiday period please
press any of the select buttons under the
front ap.
PLEASE NOTE: Any alteration to the current
time or date will cancel any Holiday
programme set.
N.B. Do not use the holiday
programme when conditions are
such that frost damage to the heating
system is possible (unless a frost
protection thermostat is tted to
your system).
Press the green
‘SET’ button
Use the ‘+’ and ‘-’
buttons to adjust
START DATE
Repeat process for
end period
Use the ‘+’ and ‘-’
buttons to adjust
START MONTH
Use the ‘+’ and ‘-’
buttons to select
‘HOLIDAY MODE’
Open cover
Press ‘ENTER’
Press ‘ENTER’
Press ‘ENTER’
Press ‘ENTER’
Press ‘ENTER’
Press the green
‘SET’ button
Press the green
‘SET’ button
Close cover
SAMPLE DISPLAYS
Use the ‘+’ and ‘-’
buttons to adjust
START YEAR
Enter holiday dates
Display when holiday mode is set
SETTING HOLIDAY MODE
START AT MID-DAY ON
SEPT 2009
FINISH AT MID-DAY ON
21 SEPT 2009
THURS 16 SEPT
1
To Next Page
Loading...
Need help?
General
