Horstmann ChannelPlus H47XL Series 2 User Manual

HTG1
Auto
Off until
18.30
HTG2
Auto
Off until
18.30
HTG3
Auto
Off until
18.30
WATER
Auto
Off until
18.30
8
Adjusting Default Settings
The ChannelPlus H47XL Series 2 has a number of default settings which are normally
installed. These settings are designed to reduce the need for user intervention upon
installation of the programmer. However it is possible to customise the user display by
following the procedures in the following pages. The factory default normally installed are
illustrated below;
Time and Date
Options
Clock Options
Options
Headings
Options
Time and calendar
are factory set
The programmer has
been set with the current
time and date during
manufacture.
No alteration should be
required to the time and
date. However, if any
modication is required
please refer to the
owchart on page 9
Time displayed in
24hr clock format
24 hour
or
AM/PM
Channel heading set to
standard installation
i.e. Heating 1, Heating 2,
Heating 3 and Hot Water
Heating/Water
Zones
Channels
 
 
HTG1
Auto
Off until
18.30
HTG2
Auto
Off until
18.30
HTG3
Auto
Off until
18.30
WATER
Auto
Off until
18.30
HTG1
Auto
Off until
18.30
HTG2
Auto
Off until
18.30
HTG3
Auto
Off until
18.30
WATER
Auto
Off until
18.30
  

Horstmann ChannelPlus H47XL Series 2 Specifications

General

Brand	Horstmann
Model	ChannelPlus H47XL Series 2
Category	Thermostat
Language	English