Hospira Plum 360 Service Manual (English)

Other manuals for Hospira Plum 360

Questions and Answers:

S
slynnAug 29, 2025
Why does my Hospira Plum 360 say 'Pump too high above patient'?
- L
  leeericAug 29, 2025
  To address the 'Pump too high above patient. Lower pump or replace set' alarm on your Hospira Medical Equipment, lower the infuser on the pole to place it closer to the level of the patient’s heart to resolve the occlusion. Then, press [START]. Note that the alarm can also be cleared by clearing the confirmed programs on any programmed line or opening the cassette door. This alarm indicates a distal occlusion detected during delivery due to too much backpressure.
C
Carol HallAug 28, 2025
What to do if Hospira Plum 360 Medical Equipment displays 'Distal OCCLUSION! Resolve then Backprime'?
- L
  Lauren AndersonAug 28, 2025
  If your Hospira Medical Equipment displays 'Distal OCCLUSION! Resolve then Backprime', it means a distal occlusion was detected while attempting to backprime or during a cassette check. Examine the distal line for kinks. Resolve the distal occlusion and then either backprime or open and close the cassette door.
J
Jerry BrooksAug 27, 2025
What to do if Hospira Plum 360 displays 'Door opened! Infusion stopped! Close Door'?
- K
  Kevin LopezAug 27, 2025
  If your Hospira Medical Equipment is displaying 'Door opened! Infusion stopped! Close Door', it means the cassette door was opened during a delivery. To resolve this, close the cassette door with the cassette inserted.
F
Frederick BrownAug 26, 2025
What to do if Hospira Plum 360 displays 'Keypad locked. Enter code to disable'?
- E
  Erik LunaAug 26, 2025
  If your Hospira Medical Equipment displays 'Keypad locked. Enter code to disable', it means that while the keypad was locked, someone pressed [STOP] or opened the cassette door during delivery. Enter a valid keypad unlock code.
E
Eric HarrisAug 25, 2025
What does 'Keep Plugged into AC! Service battery/ replace pump' mean for Hospira Plum 360 Medical Equipment?
- M
  Michael MeyersAug 26, 2025
  If your Hospira Medical Equipment displays 'Keep Plugged into AC! Service battery/ replace pump', it means the battery or battery charge circuitry needs servicing. Power off the infuser and replace it as soon as possible, so that it can be sent for repair.
M
Mary JohnsonAug 25, 2025
What does it mean when Hospira Medical Equipment says 'Low Battery! Plug into AC power!'?
- S
  Stephanie AtkinsonAug 25, 2025
  If your Hospira Medical Equipment displays 'Low Battery! Plug into AC power!', it means the battery charge level is low. To resolve this, plug the equipment into an AC (mains) power source.

Hospira Plum 360 Specifications

General

Device Type	Infusion Pump
Manufacturer	Hospira
Model	Plum 360
Drug Library	Yes
Volume to be Infused (VTBI) Range	0.1 to 9999 mL
Battery Type	Rechargeable Lithium-ion
Power Requirements	100-240V AC, 50/60Hz
Infusion Types	Continuous, Intermittent, PCA
Display	Color LCD
Connectivity	Ethernet, RS-232
Battery Life	Up to 8 hours
Flow Rate Range	0.1 to 999 mL/hr
Occlusion Pressure Settings	Low, Medium, High
Operating Temperature	10°C to 40°C (50°F to 104°F)
Operating Humidity	20% to 80% RH, non-condensing
Alarms	Occlusion, air-in-line, low battery
Compatibility	Compatible with Hospira infusion sets and accessories