EasyManua.ls Logo

Hospira Plum XL - User Manual

Hospira Plum XL
61 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
System
Operating
Manual
For use with list 11859-04
W
i
t
h
D
a
t
a
P
o
r
t
T
M
430-05709-003 (A, 01/2009)
XLDCOVR.FM Page 1 Friday, January 16, 2009 2:29 PM

Other manuals for Hospira Plum XL

Question and Answer IconNeed help?

Do you have a question about the Hospira Plum XL and is the answer not in the manual?

Summary

1.0 CONVENTIONS

1.1 Warnings Cautions, and Notes

Describes warning, caution, and note messages used in the manual for safety emphasis.

2.0 FEATURES

2.1 User Qualification

Details user qualifications and supervision requirements for operating the infusion device.

3.0 GETTING STARTED

3.1 Unpacking

Provides instructions on how to unpack and inspect the Plum XL Micro/Macro with DataPort.

3.2 Self-Test

Outlines the procedure for performing the instrument's self-test before initial use.

4.0 COMPONENTS

4.1 Control Dial Settings

Explains the functions of the control dial settings like OFF CHARGE, SET RATE, SET VTBI, RUN, HOLD/RESET, CLEAR VOL.

4.2 Operating Keys

Describes the function of various keys on the device such as PRI-SEC, QUICKSET, TITRATE, BACKPRIME, SILENCE.

4.3 Additional Features

Details additional features like the Audio Switch and Lockout Switch on the rear panel.

5.0 INSTRUCTIONS FOR USE

5.1 Setup

Describes the initial setup procedures for the Plum XL Micro/Macro with DataPort.

5.2 Cassettes

Explains compatibility and preparation of PlumSets administration sets with the device.

5.3 Using The DataPort

Details how to utilize optional communication accessories and link to a host computer.

6.0 PROGRAMMING

6.1 Primary Only Delivery

Guides on programming the device for primary only infusion delivery.

6.2 Secondary Only Delivery

Provides instructions for programming the device for secondary only infusion delivery.

6.3 Piggyback Delivery

Explains how to program the device for piggyback infusion delivery.

6.4 Backpriming

Describes the backpriming function to clear air from the cassette or secondary line.

6.5 Changing Containers

Outlines the aseptic procedure for changing fluid containers during operation.

6.6 Titration

Explains incremental adjustment of fluid delivery rate while pumping.

6.7 Clear Volume

Describes how to erase the total volume delivered from the device's memory.

6.8 Lockout

Explains how to use the lockout switch to prevent unauthorized tampering.

7.0 TROUBLESHOOTING

7.1 Alarms

Provides guidance on clearing alarm conditions and identifying possible causes.

7.2 Malfunctions

Explains how to address device malfunctions indicated by error messages.

7.3 Technical Assistance

Provides contact information for technical support and ordering parts or manuals.

8.0 PRECAUTIONS

8.1 Artifacts

Discusses potential electrical artifacts created by the infusion device on monitoring equipment.

8.2 Healthcare Professional and Patient Related

Covers responsibilities of healthcare professionals and patient safety regarding device use.

8.3 Epidural Administration

Details precautions and recommendations for using the device for epidural administration.

8.4 Battery Operation

Provides guidelines and cautions for operating the device using battery power.

8.5 Sets and Accessories

Specifies compatible sets and accessories and guidelines for their use.

8.6 Backpriming

Advises against backpriming for dry powders and ensures safe backpriming procedures.

8.7 General

Covers general precautions including explosion hazards, product damage, and RF interference.

9.0 CLEANING, MAINTENANCE, AND STORAGE

9.1 Cleaning and Sanitizing

Provides detailed guidelines and cautions for cleaning and sanitizing the device.

9.2 Battery Maintenance

Offers advice on maintaining battery charge and prolonging battery life for optimal performance.

9.3 Storage

Presents guidelines for storing the device to prolong its operational life.

9.4 Service

Specifies that all servicing and adjustments should be done by qualified personnel.

10.0 SYSTEM ACCESSORIES

11.0 SPECIFICATIONS

12.0 WARRANTY

Hospira Plum XL Specifications

General IconGeneral
TypeInfusion Pump
ModelPlum XL
Accuracy± 5%
DisplayLCD
ManufacturerHospira
Flow Rate Range0.1 to 999 mL/hr
AlarmsAir-in-line, Occlusion, Low Battery
Infusion ModesContinuous, PCA

Related product manuals