Hotone JOGG User Manual

UserManual
The contents of this manual are subject to change without notice.
CONNECTIONS

Hotone JOGG Specifications

Electrical Specifications

input impedance	1MΩ
output impedance	1kΩ
power requirement	9V DC center negative/USB bus power
current consumption	200mA

Weight and Dimensions

dimensions	101mm (D) x58mm (W) x47mm (H)
weight	220g

Summary

Connections Diagram

Panel Introduction

Input and Output Ports

Details the 1/4" mono input, stereo outputs, and balanced XLR output connections.

Ground Lift Switch

Explains the LIFT/GND switch function for noise reduction via ground loop isolation.

Control Knobs

Describes the GAIN knob for input level and the OUTPUT knob for overall volume.

Footswitch Functionality

Explains the footswitch for bypassing signal or direct monitoring with buffer bypass.

Additional Panel Features

USB Connectivity and Power

Details the Micro USB jack for computer connection and power supply options.

Auxiliary and Headphone Connections

Describes the 1/8" stereo AUX IN and PHONES output jacks for expanded use.

DC Power Input

Specifies the DC 9V input jack for connecting the external power supply.

Product Overview and Features

General Description

Summarizes the Jogg as a mini-pedal sized audio interface for performance and recording.

VStomp Amp License

Details the included VStomp Amp virtual amp software for organic, studio-grade sound.

Technical Specifications

FCC Compliance

Provides the FCC warning and operating conditions for Class B digital devices in the USA.

Compatibility and Requirements

Notes on device compatibility, recommended OS, and system requirements for optimal performance.