Need help?Do you have a question about the Hotone Ampero MP-100 and is the answer not in the manual?
General| Type | Multi-Effects Processor |
|---|---|
| Weight | 1.2 kg |
| Input Impedance | 1 MΩ |
| Output Impedance | 1 kΩ |
| Sampling Rate | 48 kHz |
| Bit Depth | 24-bit |
| Effects | Yes |
| Amp Modeling | Yes |
| Impulse Response Support | Yes |
| Looper | Yes |
| USB | Yes |
| Computer Connectivity | Yes |
| Bluetooth | No |
| Effects Types | Modulation, Delay, Reverb |
| Inputs | 1 x 1/4" Instrument |
| Outputs | 1 x 1/4" Main Out |
| Display | LCD |
| Power Supply | DC 9V |
Export user patches using Ampero Editor software before firmware update to prevent data loss.
Obtain the latest Ampero firmware and Ampero Editor software from the official website.
Detailed instructions for updating Ampero firmware via Ampero Editor and USB connection.
Guide for importing previously exported user patches back into Ampero after firmware update.
To Next Page
