To Next PageTo Next Page
Need help?Do you have a question about the Hotone Ampero MP-100N and is the answer not in the manual?
Digital Audio Processing| bit depth | 24-bit |
|---|---|
| sample rate | 44.1kHz |
| signal-to-noise ratio | 120dB |
Effects and Patches| effects | 261 |
|---|---|
| simultaneous effects modules | 9 |
| patches | 198 (99 user patches, 99 factory patches) |
Looper and Drum Machine| looper time mono | 100 seconds |
|---|---|
| looper time stereo | 50 seconds |
| internal drum machine rhythm patterns | 100 |
Inputs and Outputs| instrument input | 1/4” Tip Sleeve (TS) Instrument jack |
|---|---|
| auxiliary input | 1/8” Stereo Auxiliary In (Aux In) jack |
| expression pedal input | 1/4” Tip Ring Sleeve (TRS) Expression Pedal input jack |
| MIDI input | Standard 5 pin MIDI input jack |
| unbalanced stereo output | Two 1/4” Tip Sleeve (TS) Unbalanced Stereo output jacks |
| balanced stereo output | Two XLR Balanced stereo output jacks, with ground lift switch |
| headphones output | 1/8” Stereo headphones output jack |
Resistance| instrument input resistance (E.GT) | 1MΩ |
|---|---|
| instrument input resistance (A.GT) | 4.7MΩ |
| line input resistance | 10kΩ |
| aux in resistance | 10kΩ |
| unbalanced output resistance | 3.2kΩ |
| balanced output resistance | 2kΩ |
| headphones resistance | 66Ω |
Display and Connectivity| screen size | 4” |
|---|---|
| screen resolution | 800 x 480 |
| screen type | Color Dynamic Display Touch Screen |
| USB port | USB 2.0 Type-B port, supports USB Audio 2.0 |
Power Requirements| voltage | 18V DC Center Negative |
|---|---|
| current consumption | 500mA Max |
Physical Dimensions| width | 320mm |
|---|---|
| depth | 147mm |
| height | 46mm |
| weight | 1408g |
Safety guidelines for usage, potential hazards, and conditions to avoid.
Instructions for cleaning the device and procedures to follow in case of malfunction.
Description of the display screen, knobs, buttons, and footswitches on the front panel.
Details of all input/output jacks, USB, MIDI, and power ports on the rear panel.
Step-by-step instructions for initial setup, connection, tuning, and patch selection.
Identification of on-screen indicators, navigation buttons, and control features.
How to use the touchscreen, quick access knobs, and main knob for navigation and parameter adjustment.
Detailed guide on using the Ampero's chromatic tuner and drum machine.
Comprehensive guide to operating the Ampero's looper, including recording and playback.
How to use and configure the built-in and external expression pedals.
How to access the editing menu to modify and save patches.
How to select and edit individual effect modules and their parameters.
Adjusting patch volume and tempo settings within the editing menu.
How to map footswitch functions and adjust control parameters.
Viewing and managing current settings for CTRL footswitch, quick access knobs, and expression pedals.
Setting parameter targets for the Quick Access Knobs.
Assigning functions to the CTRL footswitch and controlling modules.
Using and configuring Tap Tempo and Tap Divide features.
Setting up and calibrating the built-in and external expression pedals.
Adjusting the expression pedal's range and sweep curve.
Configuring the expression pedal's behavior as a volume pedal.
Step-by-step instructions for calibrating the expression pedal for optimal performance.
Configuring the external expression pedal's target, range, and calibration.
How to save current patch settings and configurations.
Accessing and configuring global settings like I/O, USB Audio, and MIDI channels.
Setting global input/output levels and configuring USB audio interface.
Assigning functions to footswitches and configuring MIDI channels.
Setting up the working mode and functions for the EXP 2/FS jack and external footswitches.
Customizing display settings, language, color, and adjusting global EQ.
Displays firmware version and manufacturer information.
Guide on how to perform a factory reset, including warnings and confirmation steps.
Connecting the Ampero directly to an instrument and amplifier setup.
Connecting to an amp's FX Loop Return or Power Amp input.
Connecting the Ampero to mixers, audio interfaces, and headphones for various applications.
Connecting the Ampero to a computer via USB for audio interface functionality.
Connecting external audio sources to the Ampero's AUX IN jack.
Details on FX1, FX2, FX3 dynamic effects, their descriptions, and parameter ranges.
List of acoustic and bass effects, their descriptions, and parameter ranges.
List of overdrive/distortion effects, their descriptions, and parameter ranges.
List of modulation/chorus effects, their descriptions, and parameter ranges.
List of flanger, tremolo, and vibrato effects, their descriptions, and parameter ranges.
List of phaser, tremolo, and amp clean effects, their descriptions, and parameter ranges.
Lists of amp clean and high gain effects, their descriptions, and parameter ranges.
List of bass, acoustic, and noise gate effects, their descriptions, and parameter ranges.
List of cabinet and impulse response (IR) models, their descriptions, and parameters.
Lists of EQ and delay effects, their descriptions, and parameter ranges.
Lists of reverb effects, their descriptions, and parameter ranges.
List of available drum machine rhythms, including types, numbers, names, and time signatures.
Mapping of MIDI CC# to Ampero functions for external control.
Troubleshooting steps for device power-on problems and lack of sound output.
Steps to diagnose and resolve noise and other sound quality issues.
Specific tips for addressing expression pedal functionality and calibration problems.
