To Next PageTo Next Page
Need help?Do you have a question about the Hotone AMPERO II Stomp and is the answer not in the manual?
General| Power Supply | 9V DC |
|---|---|
| Type | Multi-effects Processor |
| Processor | Dual DSP |
| IR Loader | Yes |
| Looper | 60 seconds |
| Connectivity | USB, Bluetooth, MIDI |
| I/O | Expression Pedal |
General safety warnings and precautions for product use.
Conditions to avoid for proper operation and to prevent malfunction.
Guidelines for safe power connection and adapter usage.
Precautions to ensure safe operation and prevent damage.
Proper cable connection procedures and handling electromagnetic interference.
Describes the signal routing and effect procession in the unit.
Defines effect slots as spaces for adding effects within a chain.
Explains modules as types of effects available in the unit.
Defines parameters as variables that determine effect application.
Defines nodes as intersection points in effect chains.
Defines patches as stored settings for tones and controllers.
Defines a bank as a set of 3 patches.
Adjusts the overall volume of output and headphone connections.
Displays unit status and allows touch interaction for edits.
Navigates menus and adjusts parameters on the display.
Used to lock or unlock the touchscreen functionality.
Adjusts parameters displayed on the lower part of the screen.
Used to change patches, toggle effects, and set tap tempo.
Connects an external expression or footswitch controller.
1/4” unbalanced stereo input for guitar or other instruments.
1/4” balanced stereo TRS outputs for amps, mixers, or interfaces.
Turns the unit’s power on or off.
Power supply input (9-18V DC center negative).
Connects MIDI controllers or sends/receives MIDI messages.
USB 2.0 Type-C port for connecting to your computer.
1/4” unbalanced stereo TRS input/output for external effects.
1/8” stereo input for connecting external devices like phones.
1/8” stereo output for connecting headphones.
Steps for connecting instruments, amps, and headphones.
Connect the power supply and turn on the unit.
Selects the correct input mode based on the instrument type.
How to tune your guitar using the Ampero II Stomp's tuner.
How to choose and switch between patches and banks.
Displays the current patch number and name for identification.
Shows current parameters controlled by quick access knobs.
Navigates to the next page of the parameter list.
Switches between Patch Mode and Stomp Mode operation.
Indicates current input/output signal levels and clipping.
Indicates expression pedal status (on or off).
Indicates the current screen lock status.
Displays the current patch tempo.
How to change patches and edit settings using the touchscreen.
Adjusts parameters directly above on the touch screen.
Selects and adjusts controls on the unit.
How to select and confirm menu items or parameters using the knob.
Introduces the tuner, looper, unit modes, and bypass functions.
Detailed guide on how to use the built-in tuner.
How to access and operate the looper functions.
Details different looper operations and status modes.
How to switch between Patch Mode and Stomp Mode.
How to bypass the unit and its different modes.
How to edit your patches to achieve desired tones.
Shows the internal signal flow and effect combination.
Explains the structure of effects chains A and B.
Defines input, output, split, and mixer nodes in effect chains.
Describes effect slots as spaces for adding effects within a chain.
Lists the 13 types of effect modules available.
Explains the three states of an effect slot: Empty, Off, On.
Sets the input signal source for a current effects chain.
Options for chain B input: None or Chain A.
Selects the input channel type (L/R, Sum, Stereo).
Adjusts the input signal level from Mute to +20dB.
Decides where the output signal goes.
Adjusts the output signal level from Mute to +20dB.
Adjusts the output signal stereo panning.
Explains Parallel and Split-Mix chain types.
Splits input signal to two outputs via chains A and B.
Mixes two signal inputs into one output.
Connects chain A and B in series (head to tail).
Drag and drop output node of chain B onto chain A.
Drag and drop input node of chain B onto chain A.
Drag and drop input node of chain B to output node of chain A.
Drag and drop nodes on chain A for Split-Mix.
Load built-in templates or save current settings as a user template.
Setup split and mixer nodes for optimal results.
Configure split node modes and level settings.
Converts input signal to dual mono for chains A and B.
Setup parameters for mixing A/B chain signals.
Save current effects chain settings as a user template.
Add modules to slots and select/edit effects.
Adjust effect parameters and turn effect slots on/off.
Tools for managing modules within effect slots.
Swap modules between different slots.
Copy module settings and paste them to other slots.
Remove modules from effect slots.
Adjust patch tempo from 40-300BPM and patch volume 0-100.
Sync effects to tap tempo and set tap divide values.
Requirements for using the FX loop jacks.
Sends signal from previous slot to FX Loop Send jack.
Receives signal from FX Loop Return to the next slot/node.
Inserts external devices connected to FX Loop jacks.
External device connected to the effects chain in series.
External device connected to the effects chain in parallel.
Set footswitch functions, quick access knobs, and expression pedal.
View footswitch functions, CTRL targets, and EXP pedal targets.
Assign functions to footswitches 1-3 in Stomp Mode.
Select slots controlled by the CTRL footswitch.
Set quick access knob targets for main menu parameters.
Configure expression pedal target, range, and calibration.
Set up to four effects parameters for the expression pedal.
Set expression pedal range and sweep curve.
Step-by-step instructions to calibrate the expression pedal.
How to switch the external expression pedal on or off.
Save changes to effects parameters and control settings.
Browse, edit, copy, and paste patches.
Sort the patch list by moving or swapping patches.
Rename patches via the management menu.
Copy patch data and paste it to another location.
Access global functions like I/O, USB Audio, EQ, and MIDI.
Set global input/output levels and modes.
Choose between DSP Bypass and Analog Bypass modes.
Select output signal source for output and FX loop send jacks.
Configure USB audio settings when using as an interface.
Explains how input signals are routed to USB audio inputs.
Explains how output signals are routed from USB audio outputs.
Example showing how to monitor different signal sources.
Record dry and wet tracks simultaneously with DAW.
Route USB outputs to effects chains for reamping or tone creation.
Set unit mode, bank select mode, and auto cab match.
Set working mode of EXP/CTRL jack and external footswitches.
Lists functions, modules, and their corresponding LED colors.
Set MIDI input source, channels, and clock I/O options.
Set up global EQ for overall tone sculpting.
Setup display modes and system UI language.
Switch between modes emphasizing patch number or name.
Return the unit to its original factory settings.
Basic setup for connecting your instrument and amp.
Connect to amp's FX Loop Return or power amp input.
Connects Ampero II Stomp into a pedalboard setup.
Connect outputs to mixers, interfaces, or headphones.
Connect to a computer via USB to use as an audio interface.
Connect external audio sources to the AUX IN jack.
Manage device via free software for editing, updates, and file transfer.
Details compressor effects like Comprosso, Comparoma 4, Blue Sustainer.
Details boost effects like Pristine Boost, Forest Boost, Gated Boost.
Details noise gate effects like AI Gate, Fast Gate, Custom Gate.
Details filter effects like Low Pass, Band Pass, High Pass.
Details acoustic simulator effects like Acoustic Refiner, AC Sim.
Details notch filter effects like Notch, Peak.
Details envelope filter effects like Toucher G, Toucher B.
Details auto filter effects like Crier G, Crier B, LFO Filter.
Details pitch effects like Analog Octa 1, Analog Octa 2.
Details pitch effects like Digital Octa, Dual Pitch, Quad Pitch.
Details detune effects like Dual Detune, Quad Detune.
Simulates the detune effect from a legendary 1980s pitch bend pedal.
Used as a virtual capo or to simulate down tunings.
Details harmonizer effects like Harmonizer 1, Harmonizer 2.
Simulates a 12-string guitar sound with one knob.
Bitcrusher/sample rate reducer with full control.
Produces inharmonic frequency spectra with unique bell effects.
Simulates the sound of playing over an old phone.
Simulates a tape saturation simulator for analog warmth.
Simulates vintage microphone sound.
Details wah pedal effects like Clay Wah, Voxy Wah.
Assign Position parameter to expression pedal for wah control.
Details overdrive effects like Green Drive, Green 9.
Details overdrive effects like Screamood, Dr. Blues, Force Drive.
Details overdrive effects like Tube Clipper, Blues Butter, Grand Driver.
Details bass drive effects like Solid Steel, Bass OD.
Simulates the Darkglass Microtubes B7K Analog Bass Preamp.
Details clean amp simulators like Tweed Chap, Tweed Lux.
Details clean amp simulators like Tweed Prince, Baseman Norm.
Details blackface amp simulators like Black Twin, Black Deluxe.
Details blackface amp simulators like Black Deluxe+, Black Prince.
Details brownface amp simulators like Brown King Clean, Brown Vibra.
Details brownface amp simulators like Brown Concert, Brown Super.
Details silverface amp simulators like Silver Twin, Silver Master.
Simulates the Supro Dual-Tone 1624T combo for retro tone.
Details VOX amp simulators like Voxy 15 TB, Voxy 30HW Norm.
Details VOX amp simulators like Voxy 30HW TB.
Details Marshall amp simulators like Marshell Blues, Marshell 45.
Details Marshall amp simulators like Marshell 45+, Marshell 45 Jump.
Details Marshall JMP50 amp simulators like Marshell 50, Marshell 50+.
Details Marshall JMP50 Jump amp simulators like Marshell 50 Jump.
Details Marshall SLP amp simulators like Marshell SLP, Marshell SLP+.
Details Marshall SLP Jump amp simulators.
Details Marshall JCM800 amp simulators like Marshell 800.
Details Pendragon amp simulators like Pendragon Drive.
Details Messe amp simulators like Messe IIC+.
Details Glacian amp simulators like Glacian Drive.
Details Tang amp simulators like Tang A30 Drive.
Details Fryman amp simulators like Fryman HB.
Details Bogner amp simulators like Boger XT Blue V.
Details Ampeg amp simulators like Ampage Classic.
Details Ampeg amp simulators like Alchemy Pre, Voxy Bass.
Details Supro amp simulators like Superb Dual Drive.
Controls sound, eliminates feedback, and expands tone.
Controls sound, eliminates feedback, and expands tone for bass.
Simulates the Mesa/Boogie 5-band graphic EQ module.
A 10-band equalizer suitable for any instrument.
Details chorus effects like Aozora Chorus, Grand Choruium.
Details chorus effects like Liquid C, Bass Chorus.
Details flanger effects like Flanger, Bass Flanger.
Details flanger effects like Neg Flanger, Trem Flanger.
Details tremolo effects.
Details phaser effects like 90 Phaser, Green Phaser.
Details phaser effects like Stone Phaser, Notch Phaser.
Details tremolo effects like Pan Phaser, Minivibe.
Simulates a rotary speaker with detailed control.
Details tremolo effects like Custom Trem.
Details analog delay effects like Analog Delay M, Analog Delay S.
Simulates a BBD based analog delay machine.
Details BBD delay effects like BBD Delay S.
Details digital delay effects like Digital Delay M.
Simulates the sound of a tape echo machine.
Details tape delay effects like Tape Delay S.
Stereo dual delay with separated left/right channel processing.
Ping-pong delay producing stereo feedback between channels.
Delay model with sweep filter affecting repeats.
Simulates the Electro-Harmonix Deluxe Memory Man pedal.
Details Ekopress delay effects like Ekopress 80.
Details Ekopress delay effects like Ekopress 900.
Details modulo delay effects like 2290 Mod.
Details modulo delay effects like 2290 Ducker.
Details reverb effects like Studio, Club, Concert.
Details FX Loop Send, FX Loop Return, and FX Loop modules.
Details reverb effects like Arena, Small Plate.
A simple volume controller effect acting like a volume pedal.
Steps to resolve issues when the device does not power on.
Resolving issues related to no or low audio output.
Steps to identify and fix noise problems.
Resolving general sound output issues and effect parameter problems.
Resolving issues related to FX loop connections and modules.
Resolving issues with expression pedal setup and calibration.
Details bit depth, sample rate, frequency response, and dynamic range.
Specifies the number of effects, effect modules, and slots.
Specifies the looper recording time.
Lists all available input connectors and their types.
Lists all available output connectors and their types.
Details input impedance values for various inputs.
Details output impedance values for various outputs.
Specifies nominal and max input levels.
Specifies nominal and max output levels.
Details screen size, resolution, and type.
Details USB port type and supported features.
Details IR file support and format.
Details power requirements and current consumption.
Provides physical dimensions and weight of the unit.
Resolving common issues with FX loop connections and modules.
Resolving common issues with expression pedal setup and calibration.
