HOTOWELL HTW-WF01-FC Series User Manual

Smart Wifi Fan Coil Thermostat
Reference No.: HTW-WF01-FC Series
- 4 - Version 2018-1.0
The installation personnel with non-professional training shall not perform this operation!
During thermostat power off, Press these 2 buttons M & simultaneously and hold for 5 seconds to enter
ISU process. Press to adjust the configurable parameter value, and press M to switch to next parameters.
The ISU process will automatically exit and be confirmed after 5 seconds with no operation.
Parameter
Function
Configurable Value Default
1 Temperature calibration
-7°C to +9°C (internal sensor) -1
2 Fan Control Type
00:When room temp. reaches set point, the fan turns off
01:When room temp. reaches set point, the fan turns to low
00
3 Keypad Lock type
00: = All buttons will lock except the Power button
01: = All buttons will lock
01
4 Heating/Cooling
00: Cool only 01:Heating and Cooling 01
5 Min. set-point limit
5°C - 15°C 05
6 Max. set-point limit
15°C - 45°C 35
7 12/24 hours format
00:12h 01:24h 01
8 Temperature Display
00 ： display both set-point and room temp.
01 ： display set-point only
00
9 Economy Mode
00 ： Normal mode
01 ： Energy Saving mode
00
A
Heating Economy
Temperature
10°C - 30°C 20
B
Cooling Economy
Temperature
10°C - 30°C 26
C Dead Zone
1°C to 5°C (Switching differential) 1
 Products are warranted for 2 full year (checking and repairing
services) from the date of purchase which products are not
being damaged by any man-made factors.
 Service outwith the warranty period may incur an extra charge.
 More details please contact with Hotowell directly.
Warranty

HOTOWELL HTW-WF01-FC Series Specifications

General

Brand	HOTOWELL
Model	HTW-WF01-FC Series
Category	Thermostat
Language	English