To Next PageTo Next PageWhy Hotpoint Ariston LSFA+ 935 doesn't start?
If your Hotpoint Ariston dishwasher doesn't start, try these steps: First, turn the appliance off and on using the ON/OFF button, waiting about a minute before turning it back on and resetting the program. Also, ensure that the appliance is correctly plugged into the power outlet and that the dishwasher door is fully closed.
What to do if Hotpoint Ariston LSFA+ 935 Dishwasher doesn't drain water?
If water isn't draining from your Hotpoint Ariston dishwasher, it might be due to several reasons. First, check if the dishwasher cycle has fully completed. Also, inspect the water inlet hose to ensure it's not bent. Make sure that the drain duct isn't blocked and that the filter isn't clogged with food residues.
Why is my Hotpoint Ariston LSFA+ 935 Dishwasher making excessive noise?
Excessive noise from your Hotpoint Ariston dishwasher can be caused by dishes rattling against each other or the sprayer arms. Another cause could be using too much detergent, or a detergent not suitable for dishwashers, leading to excessive foam.
What to do if Hotpoint Ariston LSFA+ 935 leaves white film on dishes?
If your Hotpoint Ariston dishwasher leaves a white film or limescale on dishes and glasses, it could be due to a low level of refined salt or an incorrect dosage setting for your water hardness. Also, ensure the lid on the salt dispenser is properly closed, and check if the rinse aid has been used up or the dosage is too low.
Why Hotpoint Ariston LSFA+ 935 leaves dishes not clean?
If your dishes aren't clean after a wash in your Hotpoint Ariston dishwasher, several factors could be the cause. Check that the racks aren't overloaded and that the dishes are arranged correctly so that the sprayer arms can move freely. Ensure you're using an appropriate wash cycle for the load. Also, too much foam from incorrect detergent usage, a blocked filter, a lid on the rinse aid compartment that isn't shut correctly, or a low refined salt level could be the reason.
What to do if Hotpoint Ariston Dishwasher leaves streaks on glasses?
If your Hotpoint Ariston dishwasher leaves streaks or a bluish tinge on dishes and glasses, the rinse aid dosage might be too high.
What to do if Hotpoint Ariston LSFA+ 935 Dishwasher doesn't dry dishes properly?
If your Hotpoint Ariston dishwasher isn't drying dishes properly, make sure you've selected a wash cycle that includes a drying program. Check if the rinse aid has been used up or the dosage is too low, and ensure the rinse aid dispenser setting is suitable. Also, note that crockery made from non-stick material or plastic may not dry well.
What does A 6 mean on Hotpoint Ariston LSFA+ 935 Dishwasher?
If your Hotpoint Ariston dishwasher displays 'A 6', it means the appliance isn't taking in water. This could be due to no water in the mains supply or a bent water inlet hose. Try turning on the tap; the appliance should start after a few minutes. If beeps sounded and no action was taken, the appliance lock may have activated. Turn the dishwasher off and on, turn on the tap, and re-program the appliance.
What does A 7 mean on Hotpoint Ariston LSFA+ 935 Dishwasher?
If your Hotpoint Ariston dishwasher displays 'A 7', it indicates a water inlet hose alarm or a blocked water inlet filter. To resolve this, switch off the appliance, shut off the water tap to prevent flooding, and unplug the dishwasher. Then, check the water inlet filter for blockages.
General| Brand | Hotpoint Ariston |
|---|---|
| Model | LSFA+ 935 |
| Category | Dishwasher |
| Language | English |
Instructions for safe connection to water and electrical sources, emphasizing professional installation.
Explanation of safety systems designed to prevent water leaks and floods during operation.
Ensuring safe and compliant connection to the electrical socket and power supply.
Explanation of buttons, indicators, and the display on the appliance's control interface.
Step-by-step guide to initiating a wash cycle, including water, detergent, and selection.
Guidance on correct detergent dosage for optimal results and environmental protection.
Instructions for choosing the appropriate wash cycle based on soil level and crockery type.
Procedure to adjust the water softener based on local water hardness levels.
Instructions for filling the salt dispenser to prevent limescale deposits.
Steps to safely disconnect power and water before cleaning or maintenance.
Detailed steps for cleaning the three-part filter assembly for optimal wash results.
Important safety information regarding appliance use, installation, and child safety.
Steps to take before contacting technical assistance and information to have ready.
Solutions for issues where the dishwasher is unresponsive or cannot be controlled.
Troubleshooting steps for when water does not drain from the dishwasher.
Troubleshooting steps for when crockery is not adequately cleaned.
Resolving problems related to the dishwasher not taking in water, including tap and hose checks.
Guidance on clearing blockages in the water inlet filter.
