To Next PageTo Next PageWhy is my Hotpoint Ariston Dishwasher making excessive noise?
If your Hotpoint Ariston dishwasher is making excessive noise, it could be due to dishes rattling against each other or the sprayer arms. Another possible cause is excessive foam production, which can happen if the detergent wasn't measured correctly or isn't suitable for dishwashers.
What to do if my Hotpoint Ariston LST 328 Dishwasher doesn't drain water?
If your Hotpoint Ariston Dishwasher isn't draining water, consider the following possible causes: * The dishwasher cycle might not be finished yet. * The water outlet hose could be bent. * The drain duct might be blocked. * The filter could be clogged with food residues.
How to fix Hotpoint Ariston Dishwasher that does not start?
If your Hotpoint Ariston Dishwasher isn't starting or responding, try these steps: First, turn the dishwasher off and on using the ON/OFF button, waiting about a minute before switching it back on and resetting the program. Also, ensure the appliance is correctly plugged into the power outlet and that the dishwasher door is fully closed.
What to do if no water drains out from Hotpoint Ariston LST 328?
If your Hotpoint Ariston dishwasher isn't draining water, it might be due to several reasons. First, make sure the dishwasher cycle has fully completed. Check if the water inlet hose is bent, potentially restricting water flow. Also, inspect the drain duct for any blockages and ensure the filter isn't clogged with food residues.
What to do if Hotpoint Ariston LST 328 Dishwasher does not take any water in?
If your Hotpoint Ariston dishwasher isn't taking in water and the tap shut-off alarm is sounding (several short beeps are emitted, the ON/OFF indicator light flashes, and the number 6 appears on the display), it could be due to a few reasons. First, ensure there is water in the mains supply. Check if the water inlet hose is bent. Turn on the tap; the appliance should start after a few minutes. If the appliance lock has activated, switch off the appliance using the ON/OFF button, turn on the tap, and switch the appliance back on after 20 seconds. Reprogram the appliance and restart the wash cycle.
Why are dishes not clean after using Hotpoint Ariston LST 328 Dishwasher?
If your Hotpoint Ariston Dishwasher is not cleaning dishes properly, consider the following: * Avoid overloading the racks and ensure proper arrangement of crockery. * Make sure the sprayer arms can move freely. * Verify that you've selected an appropriate wash cycle. * Ensure that you are using the correct amount of a suitable detergent. * Check that the lid on the rinse aid compartment is correctly shut. * Ensure that the filter is clean and not blocked. * Check that the refined salt level is not low.
Why do dishes have bluish tinge from Hotpoint Ariston LST 328?
If your dishes and glasses have streaks or a bluish tinge after being washed in your Hotpoint Ariston dishwasher, the rinse aid dosage might be too high.
What does it mean when Hotpoint Ariston LST 328 displays water inlet hose alarm?
If your Hotpoint Ariston dishwasher displays the water inlet hose alarm (ON/OFF indicator light flashes and the number 7 appears on the display), immediately switch off the appliance using the ON/OFF button. Then, shut off the water tap to prevent flooding and unplug the dishwasher from the electrical socket. Check the water inlet filter for blockages from impurities.
What to do for Hotpoint Ariston LST 328 Dishwasher water inlet hose alarm?
To address a water inlet hose alarm or blocked water inlet filter on your Hotpoint Ariston Dishwasher: * Switch off the appliance using the ON/OFF button. * Shut off the water tap to prevent flooding and remove the plug from the electrical socket. * Check the water inlet filter for blockages.
Why is my Hotpoint Ariston LST 328 Dishwasher not drying dishes?
If your Hotpoint Ariston Dishwasher isn't drying crockery properly, here's what to check: * Make sure a wash cycle with a drying program was selected. * Verify that the rinse aid hasn't been used up or the dosage is too low. * Ensure the rinse aid dispenser setting is high enough.
General| Type | Built-In |
|---|---|
| Energy Efficiency Class | A |
| Noise Level | 49 dB |
| Washing Class | A |
| Drying Class | A |
| Number of Programs | 5 |
| Energy Rating | A |
| Delay Start | Yes |
| Half Load Option | Yes |
| Water Consumption | 13 L |
Guide on placing and stabilizing the dishwasher on a level surface.
Instructions for connecting water and electrical power safely.
Details on attaching the water inlet hose to cold or hot water points.
Steps for connecting the water outlet hose to a drain.
Ensuring the socket is earthed and compatible with the appliance plug.
Step-by-step guide to turn on and initiate a wash cycle.
Guidance on using the correct amount of detergent for effective washing.
How to fill the rinse aid dispenser for better drying.
Adjusting the water softener based on local water hardness.
Important safety instructions for operating the appliance.
Solutions for issues where the appliance won't power on or respond.
Troubleshooting for issues with water not being expelled from the machine.
Solutions for crockery that remains dirty after a wash cycle.
How to resolve issues related to water intake alarms.
Troubleshooting steps for water inlet filter blockage alarms.
