Hotpoint Ariston LSTF 7B019 - Special wash cycles and Options; Wash options*; Delayed start Option; Multi-functional tablets Option (Tabs)

33
EN
Notes:
Optimumperformancelevelswhen using the “Fast” and
“Express”cyclescanbeachievedbyrespectingthespecified
number of place settings.
To reduce consumption even further, only run the dishwasher
when it is full.
Note for Test Laboratories: forinformationoncomparativeEN
testing conditions, please send an email to the following address:
assistenza_en_lvs@indesitcompany.com
Special wash cycles
and Options
Wash options*
If an option is not compatible with the selected wash cycle
(see table of wash cycles), the corresponding LED flashes
rapidly 3 times and beeps will sound.
* Only available in selected models.
Multi-functional tablets Option (Tabs)
This option optimises washing and drying results.
When using multi-functional tablets, press the MULTI-
FUNCTIONALTABLETSbutton;thecorrespondingsymbol
will light up. If the button is pressed again, the option will be
deselected.
The “Multi-functional tablets” option results in a
longer wash cycle.
Half load Option using the upper or lower rack
If there are not many dishes to be washed, a half load
cycle may be used in order to save water, electricity
anddetergent.SelectthewashcycleandthenpresstheHALF
LOAD button: the indicator corresponding to the chosen rack
lights up and the wash cycle starts only in the upper or lower rack.
Remember to load the upper or lower rack only, and to
reduce the amount of detergent accordingly.
Delayed start Option
The start of the wash cycle may be delayed for a period
of time between 1 and 12 hours.
1.PresstheDELAYEDSTARTbutton:thecorrespondingsymbol
appears on the display; each time you press the button, the time
(1h,2h,etc.uptomax.12h)fromthestartoftheselectedwash
cycle will be increased.
2.Selectthecycle and close the door:thetimer will begin
counting down;
3.Oncethistimehaselapsed,theindicatorlightswitchesoff
and the wash cycle begins.
To adjust the delay time and select a smaller period of time,
presstheDELAYEDSTART button. To cancel it,pressthe
button repeatedly until the selected delayed start indicator light
switches off. The wash cycle will start automatically as soon as
the door is shut.
The Delayed Start function cannot be set once a wash
cycle has started.