Maintenance
and
care
II
Hotpoint
General
&
Important:
Always
unplug
the
appliance
from
the
power
socket
during
cleaning
and
maintenance. ·
• Never use any sharp instruments or abrasive substances, soap, household cleaner, detergent or wax
polish for cleaning.
• Use luke warm water to clean the cabinet
of
the appliance and wipe it dry.
• Never clean the appliance with flammable fluids. It could cause a damage and fire hazard.
• Clean the exterior
of
the appliance and door seal with a damp cloth and dry it through.
• Avoid water goes
in
the temperature control box. Clean with a dry cloth only:
• Clean the condenser (located at the back
of
the appliance) with a vacuum cleaner. It is suggested to
remove the dust every year.
• Shelves are all removable for cleaning purpose.
its
Important:
Care must be taken while cleaning/carrying the appliance not to touch the bottom
of
the condenser metal wires at the back
of
the appliance, as this could cause injury to fingers and hands.
Light
bulb
replacement
If the light bulb needs to
be
replaced, please contact the Technical Assistance Service.
Precautions
and
tips
! The appliance was designed and manufactured
in
compliance with international safety standards. The following warnings are
provided for safety reasons and must be read carefully.
This appliance complies with the following Community Directives:-
73/23/EEC
of 19/02/73 (Low Voltage) and subsequent amendments;
-89/336/EEC
of
03.05.89 (Electromagnetic Compatibility) and subsequent amendments; - 2002/96/CE.
CE!
8
•