Hotpoint BZ 89E1 P - Specifications and Compliance

Before connecting the appliance to the power supply, make sure that
• theapplianceisearthedandtheplugiscompliantwiththelaw.
• thesocketcanwithstandthemaximumpoweroftheappliance,whichis
indicated on the data plate.
• thevoltageisintherangebetweenthevaluesindicatedonthedataplate.
• thesocketiscompatiblewiththeplugoftheappliance.Ifthesocketis
incompatible with the plug, ask an authorised technician to replace it. Do
not use extension cords or multiple sockets.
! Once the appliance has been installed, the power supply cable and the
electrical socket must be easily accessible.
! The cable must not be bent or compressed.
! The cable must be checked regularly and replaced by authorised technicians
only (see Assistance).
! The manufacturer declines any liability should these safety measures
not be observed.
APPLIANCE SPECIFICATIONS
Dimensions*
width 43.5 cm
height 32,4 cm
depth 41.5 cm
Volume*
59 l
Dimensions**
width 45.5 cm
height 32,4 cm
depth 41.5 cm
Volume**
62 l
Electrical
connections
voltage: 230-240V~ 50Hz maximum
power absorbed 2800-3000 W
(see data plate)
* Only for models with drawn rails.
** Only for models with wire rails.
EU Directive no 65/2014
supplementing Directive 2010/30/EU.
EU Regulation no 66/2014
implementing Directive 2009/125/EC.
Standard EN 60350-1
Standard EN 50564
This appliance conforms to the
following European Economic
Community directives:
- 2006/95/EC of 12/12/06 (Low
Voltage) and subsequent
amendments;
- 2004/108/EC of 15/12/04
(Electromagnetic Compatibility) and
subsequent amendments;
- 93/68/EEC of 22/07/93 and
subsequent amendments.
- 2002/96/EU and subsequent
amendments.
- 1275/2008 standby/off mode.
ENERGY LABEL
and
ECODESIGN
Declared energy consumption
for Forced convection Class –
heating mode: ECO.
GB
7
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24