ABOVE: Allow a minimum of 100mm between the top of the fridge freezer
and the underside of the wall cupboard.
Allow a minimum of 25mm either side and 35mm from the base
of the appliance to the floor.
Installation
Location & Air Circulation
Locate appliance away from sources of heat eg. Cookers,
Radiators, Direct Sunlight as extreme temperature may
affect it’s performance.
Ensure the recommended minimum measurements are
met to:-
✱ Increase the life of the compressor.
✱ Reduce risk of condensation on the outside of the
appliance.
✱ Reduce the running costs.
✱ Reduce noise caused by vibration
.
4
100mm min
25mm min
25mm
35mm
All Hotpoint fridges, freezers and combination
fridge freezers are designed and built to
European Standards.
To Next Page
Loading...
