To Next PageTo Next PageHow to fix a Hotpoint LSF 7237 that does not start?
If your Hotpoint dishwasher isn't starting or responding, try these steps: First, turn the dishwasher off and then back on using the ON/OFF button, waiting about a minute before restarting. Also, ensure the appliance is properly plugged into the power outlet and that the dishwasher door is fully closed.
What to do if my Hotpoint Dishwasher doesn't drain?
If your Hotpoint dishwasher isn't draining water, it might be due to several reasons: * The cycle might not be complete yet. * The water inlet hose could be bent. * The drain duct might be blocked. * The filter might be clogged with food residues. Check these components and clear any blockages.
Why aren't my dishes drying in my Hotpoint LSF 7237?
If your Hotpoint dishwasher is not drying dishes properly, it might be because you selected a wash cycle without a drying program. Also, the rinse aid might be used up or the dosage is too low, or the rinse aid dispenser setting might not be suitable. Non-stick or plastic crockery may also not dry well.
Why is my Hotpoint Dishwasher so loud?
If your Hotpoint dishwasher is making a lot of noise, it could be due to dishes rattling against each other or the sprayer arms. Also, excessive foam from using the wrong detergent or too much detergent can cause noise. Make sure dishes are properly spaced and use the correct amount of dishwasher-safe detergent.
Why does my Hotpoint Dishwasher leave white film on dishes?
If your Hotpoint dishwasher is leaving a white film or limescale on dishes and glasses, it could be due to a low level of refined salt, an incorrect dosage setting for your water hardness, or a loose salt dispenser lid. Check and adjust the salt level and ensure the lid is properly closed. Also check the rinse aid level.
Why are my dishes not clean after Hotpoint Dishwasher?
If your Hotpoint dishwasher is not cleaning dishes effectively, it could be due to several factors: the racks might be overloaded, the dishes may not be arranged well, the sprayer arms might be blocked, or the wash cycle selected is too gentle. Also, too much foam from incorrect detergent usage, a loose rinse aid compartment lid, a dirty or blocked filter, or low refined salt levels can cause this. Check these components and settings to improve cleaning performance.
Why does my Hotpoint Dishwasher leave streaks on glasses?
If your Hotpoint dishwasher is leaving streaks or a bluish tinge on dishes and glasses, it could be because the rinse aid dosage is too high. Try reducing the amount of rinse aid you're using.
What to do if Hotpoint LSF 7237 door won't close?
If your Hotpoint dishwasher door won't close, it might be because the lock was released. Try pushing the door firmly until you hear a 'clacking' noise.
General| Type | Freestanding |
|---|---|
| Number of programmes | 7 |
| Drying Performance | A |
| Cleaning Performance | A |
| Delay Start | Yes |
| Half Load Option | Yes |
| Dimensions (H x W x D) | 85 x 60 x 60 cm |
| Size | Full-size |
How to place and level the appliance for stability and proper operation.
Instructions for connecting the appliance to water supply and electrical power.
Detailed steps for connecting the water inlet hose to the tap.
Guide on how to connect the water outlet hose to the drain.
Information on the appliance's systems to prevent water leaks and floods.
Critical safety checks for plugging the appliance into the mains socket.
Instructions for applying an anti-condensation strip under the worktop.
Guidance on preparing and running the very first wash cycle.
Key technical details and specifications of the dishwasher model.
A diagram and list identifying the main external and internal components.
Explanation of buttons, knobs, and indicator lights on the control panel.
How to load plates, pans, and bowls into the lower rack.
Proper placement of cutlery and utensils in the basket with examples.
How to load delicate items like glasses and cups into the upper rack.
How to adjust the tip-up compartments for better loading.
List of materials and items that should not be washed in the dishwasher.
Step-by-step guide to start the dishwasher and select a program.
Instructions on how much detergent to use for optimal results.
How to change a wash cycle if it has just started.
Procedure for adding more dishes after a cycle has begun.
What happens and how to resume after power cuts or door openings.
Details on available wash options like Half Load and Tabs.
How to set a delayed start time for the wash cycle.
Using the half load function to save resources for smaller loads.
How to use and select the multi-functional tablets option.
Instructions and recommendations for choosing the right wash cycle.
How to fill the rinse aid dispenser and adjust its dosage.
Fine-tuning the rinse aid amount for better drying results.
How to configure the water softener based on local water hardness.
How to fill the salt dispenser for water softening.
Steps to safely turn off water and electricity before maintenance.
How to clean the appliance's surfaces and remove internal marks.
Tips to keep the dishwasher fresh and avoid smells.
How to remove and clean the upper and lower sprayer arms.
Instructions for cleaning the filter at the water tap connection.
Detailed steps for cleaning the three-part filter system inside the machine.
Procedures for leaving the machine unused for extended periods.
Essential safety rules for operating the dishwasher.
Information on how to properly dispose of the appliance.
Advice on efficient water and energy usage.
Guidance on using phosphate-free and enzyme-based detergents.
Solutions for when the appliance won't turn on or respond.
How to fix issues with the dishwasher door not latching.
Causes and solutions for water not draining from the dishwasher.
Identifying and resolving sources of loud noises.
How to address white film or limescale on washed items.
Solutions for streaks or bluish tinges on glassware.
Troubleshooting why dishes are not drying correctly.
Reasons and fixes for crockery not being properly cleaned.
What to do if the dishwasher doesn't fill with water.
Diagnosing and resolving problems with the water inlet hose or filter.
Steps to take before calling for professional help.
Details needed when contacting technical support.
