To Next PageTo Next PageWhy are the dishes and glasses covered in a white film in my Hotpoint LTF 11M132?
If your dishes and glasses are covered in a white film or limescale deposits after washing in your Hotpoint dishwasher, ensure the dishwasher has refined salt and the water hardness setting is correct. Also, check that the salt and rinse-aid dispenser caps are properly closed, and ensure that the rinse aid hasn't run out or the dosage isn't too low.
Why do dishes and glasses have a bluish tinge in my Hotpoint LTF 11M132?
If your dishes and glasses have streaks or a bluish tinge after being washed in your Hotpoint dishwasher, it might be because the rinse aid dosage is too high.
How to remove white film from dishes in Hotpoint LTF 11M132?
If your Hotpoint dishwasher leaves a white film or limescale on dishes and glasses, it could be due to a lack of refined salt. Adjust the water hardness setting appropriately. Ensure the salt and rinse-aid dispenser caps are properly closed. Check if the rinse aid has run out or if the dosage is too low.
Why are my dishes streaked after using my Hotpoint LTF 11M132?
If your Hotpoint dishwasher leaves streaks or a bluish tinge on dishes and glasses, it's likely that the rinse aid dosage is too high.
Why are the dishes not clean after using my Hotpoint LTF 11M132?
If the dishes are not clean after a wash cycle in your Hotpoint dishwasher, ensure the crockery is arranged properly and the sprayer arms can rotate freely. Verify that you're using an appropriate wash cycle. Avoid excessive foam by using the correct amount and type of detergent. Ensure the rinse aid compartment lid is closed correctly, the filter is clean, and the refined salt level is adequate. Check that the height of the dishes is compatible with the rack adjustment and that the holes in the sprayer arms are not clogged.
Why is my Hotpoint Dishwasher making excessive noise?
If your Hotpoint dishwasher is making excessive noise, ensure dishes aren't rattling against each other or the spray arms. Make sure the spray arms can rotate freely. Also, check that you're using the correct amount and type of detergent for dishwashers, and avoid pre-washing dishes by hand, as too much foam can cause noise.
General| Type | Freestanding |
|---|---|
| Appliance placement | Freestanding |
| Energy Efficiency Class | A++ |
| Number of Place Settings | 11 place settings |
| Noise Level | 42 dB |
| Height | 85 cm |
| Width | 60 cm |
| Depth | 60 cm |
| Weight | 40 kg |
| Annual energy consumption | 225 kWh |
| Capacity | 11 place settings |
| Delay Start | Yes |
| Half Load Option | Yes |
| Dimensions (H x W x D) | 85 x 60 x 60 cm |
| Washing programs | Eco, Intensive, Normal |
Safety guidelines for operation, children, domestic use, and electrical safety.
Tips for reducing water and energy consumption during wash cycles.
How to position and level the dishwasher correctly for stable operation.
Instructions for connecting the water inlet and outlet hoses to the appliance.
Guidelines for connecting the drain hose to a suitable drain duct.
Details about the anti-flooding system for safety and leak prevention.
Safety requirements and steps for connecting the appliance to the electrical supply.
How to set the water hardness level for optimal performance of the softener.
Explanation of buttons, indicators, and symbols on the control panel.
Step-by-step guide to starting a wash cycle.
Detailed instructions for cleaning the filter assembly for optimal performance.
Solutions for when the dishwasher fails to start or respond to controls.
Troubleshooting steps for issues with water not draining from the dishwasher.
Solutions for when dishes are not coming out clean after a wash cycle.
Steps to take if the dishwasher is not filling with water.
What to do when the appliance shows flashing lights indicating a blockage.
Details of the standard 12-month manufacturer's guarantee.
