Hotpoint LTF 8M121 - Special Wash Cycles and Options

GB
13
Special wash cycles and Options
Notes:
Optimum performance levels when using the “Fast  wash”
and“Express40’”cyclescanbeachievedbyrespectingthe
specified number of place settings.
To reduce consumption even further, only run the dishwasher
when it is full.
Note for Test Laboratories: forinformationoncomparativeEN
testing conditions, please send an email to the following address:
ASSISTENZA_EN_LVS@indesitcompany.com
Wash options
If an option is not compatible with the selected wash cycle
(see table of wash cycles), the corresponding LED flashes
rapidly 3 times and beeps will sound.
Delayed start
The start of the wash cycle may be delayed for a period
of time between 1 and 12 hours.
1.PresstheDELAYEDSTARTbutton:thecorrespondingsymbol
appears on the display; each time you press the button, the time
(1h,2h,etc.uptomax.12h)fromthestartoftheselectedwash
cycle will be increased.
2. Select the cycle and close the door: the timer will begin
counting down;
3.Oncethistimehaselapsed,theindicatorlightswitchesoff
and the wash cycle begins.
To adjust the delay time and select a smaller period of time,
press the DELAYED START button. To cancel it, press the
button repeatedly until the selected delayed start indicator light
switches off. The wash cycle will start automatically as soon as
the door is shut.
*Onlyavailableinselectedmodels.