QUESTIONS?
USE THIS PROBLEM SOLWR
PROBLEM
I POSSIBLE CAUSE
OVENWiLL
● The plug on the range is not completely inserted in the electrical outlet-
NOT WORK
● ‘Ihe circuit breaker in your house has been tripped or a fuse has been blown.
● Oven controls not properly set.
OVENLIGHT
I
● The light bulb is loose or defective. llghten or replace.
DOES NOT WORK
● me switch operatingoven Iight is broken. U for service.
FOOD DOES NOT
I
● The OVEN SET knob not set at BROIL
BROIL PROPERLY ~
● The OVEN TEMP knob not set at BROIL
*The door not left open to the broil stop position as recommended.
● Improper shelf position being used See the Broiling Guide.
● Food is being cooked on hot pan.
● Coolmmre is not suited for broiling.
s Aluminum foil used on the broiler pan rack has not been fitted properly and
slit as recommended.
FOOD DOES NOT
● The OVEN SET knob not set at BAKE.
ROASTOR BAKE
oThe 0~ TEN@ knob not set at proper temperature.
PROPERLY
*Shelf position is incorrect Seethe Roasting or the Baking sections..,’
● Incorrect cookware or aokware of improper size is being used.
. A fo~ te~ W= not ~ wh~ needed @
&IW down browning during roasting. t
“ The OVEN TEMP knob needs adjustment. See the Adjust the
,,.
Oven Thermostat-Do
It Yourselfsection.
ovENTEMP~
cThe OWN TEMP knob needs adjustment. See the Adjust the
TOO HOT OR’100 COLD
OvenThermostat-Do lt YOume~section.
SUREACEUNITS:: ‘ ~ ~
● The ‘stice units are not plugged in solidly.
NOTFUNCI?ONING’;“’”.,,,
● The drip pans are not set securely in the cooktop.’ ‘
PROPERLY;”.’;::;, ,:.”.;’.;::‘‘
..... .
“,.,;,,
:.
● The surfaceunit controls are not properly set. .
, ;~,:...
0~ DOOR::i’ ; ~
● Because the oven door is removable, it sometimes gets out of position during
CROOKED -“’~’”-, ‘“
installation To straighten the door, pushdown on the high comer.
If you need more help... call, tolI free:
GE Answer Centefl
800.6263000
consumer information service
30
To Next Page
Loading...
