Hotpoint RLA 21 - Getting Your Appliance Ready for Use; Thermostat setting

5
H
Fruit and Vegetable Crisper
I
Drain for Defrost Water
J
Removable, Height-adjustable Shelves
K
Hinged bottle rack
A
Temperature control
This regulate the temperature inside the appliance
automatically. To adjust the temperature control, use
a coin to turn the knob.
B
Removable door shelves with lid and egg tray
C
Removable miscellaneous shelf
D
Hinged shelf
E
Compartment for a 2 litre
bottle
F
Removable door shelf for
bottles
G
Levelling feet
GET TO KNOW YOUR APPLIANCE
A
J
F
E
K
H
GG
I
J
D
C
B
GETTING YOUR APPLIANCE READY FOR USE
NOTICE
After the appliance has been delivered, leave it to stand
in its upright position for approximately 3 hours, be-
fore plugging it into the mains and switching on, to
ensure proper performance.
Before placing food in the refrigerator clean the interior with
warm water and baking soda.
Thermostat setting
The thermostat setting will depend on the location of the
appliance, room temperature and how often the door is
opened. After plugging the appliance into the socket, make
sure that the light is on when the door is opened. When
starting the appliance for the first time turn the thermostat
control to the coldest setting for 24hrs then adjust accordingly.
After a few hours have passed, you can place fresh food in
the refrigerator compartment.