- Multi SSID Isolation: If On is selected, it prevents your devices from communicating
across the Main and Guest Wi-Fi access points.
- Allow Guest Wi-Fi users to access the Web interface: If the box is checked, users on
the Guest Wi-Fi also can access the Web User Interface.
- Wi-Fi Name: Service Set Identifier (SSID). To change it, enter a string less than 32
characters as the name for your wireless local area network (WLAN).
- Wi-Fi Password: To change, enter the new Wi-Fi password. The password needs to
be at least 8 characters long. l Privacy Separator: If ON is selected, your devices on
the same Wi-Fi Name can't make Local Area Network communication.
- Wi-Fi Band: It supports both the 2.4- and 5GHz bands of wi-fi spectrum for top
throughput. You can choose Wi-Fi Band depends on your preference.
NOTE: if you connect WLAN printer to your Mobile Hotspot, Privacy Separator should be
OFF to send file from your PC to the printer
- SSID Stealth: If ON is selected, the Wi-Fi name won't be found by other devices
around it. You need to manually enter the Wi-Fi name and connect.
- Authentication Method: The authentication methods are described below.
- Encryption Method: Select an encryption method from the drop-down list.
- Display Wi-Fi Name and Password: If ON is selected, the Wi-Fi Name and Password
will be displayed on your Mobile Hotspot device display.
To Next Page
Loading...
Need help?
General