Need help?Do you have a question about the HotSpring Gleam and is the answer not in the manual?
Read and follow all instructions for safe spa operation.
Prevent unauthorized access and ensure supervision to avoid child drowning.
Connect to ground, use GFCI, and follow wiring guidelines to prevent shock.
Risks from electrical installation, components, and proximity to water.
Advisories for pregnant women and those with medical conditions.
Warnings about high temperatures, alcohol, drugs, and health dangers.
Advise testing water temperature and preventing slips or burns.
Approved cleaning agents and methods for the spa shell.
General guidelines for spa usage, including dos and don'ts.
Introduces various spa jets, controls, and features with numbered descriptions.
Details the operation and adjustment of the Moto-Massage DX jet (GLEAM only).
Explains direct and combination hydromassage jets and their functions.
Operation of the Vidro water feature and meaning of the spa logo lights.
Initial steps before filling the spa and preparing for operation.
Step-by-step guide for filling the spa and initial setup.
Illustration and labels for components within the equipment compartment.
Importance of water clarity, testing, and draining schedules.
Recommended levels for pH, alkalinity, hardness, and chlorine.
Safe handling and precise use of spa chemicals to avoid hazards.
Step-by-step instructions for safely adding chemicals into the filter compartment.
Details on testing, filtration, chemical balance, and water component management.
Information on conditioners, pre-filters, stain control, and foam inhibitors.
Role of oxidizers and EPA registered sanitizers for water hygiene.
Operation and maintenance of the optional ACE Salt Water Sanitizing System.
Overview of the EverFresh system components and usage recommendations.
Recommendation for sodium dichlor and its properties for water sanitization.
Instructions for cleaning the ozone injector and general ozone system care.
Guidelines for maintaining spa water during short and long absences.
Optional additives for mineral balance and foam suppression.
Definitions of chemical terms used in spa water maintenance.
Details on hard buttons, soft buttons, and indicator icons on the control panel.
How to access and use the Options screen for various settings.
Overview of the Home Screen display, Memory, All Off, Audio, and Clean functions.
How to set, adjust, and lock the spa water temperature.
Details on activating and deactivating Temperature Lock and Spa Lock.
Activating Spa Lock and operating jet pumps for different models.
Controlling interior and exterior spa lights, dimming, and color options.
Activating and deactivating the summer timer for temperature management.
Navigating to and using the optional ACE Water Care system settings.
Controlling the wireless audio system, volume, tracks, and source selection.
Illustrates changing audio sources like iPod, TV, AUX, and Bluetooth.
Pairing and controlling a Bluetooth device with the spa audio system.
Diagrams showing jet layout for GLEAM Jet Pumps 1, 2, and 3.
Diagrams showing jet layout for PULSE Jet Pumps 1 and 2.
Diagrams showing jet layout for FLAIR Jet Pumps 1 and 2.
Diagrams showing jet layout for BOLT Jet Pump.
Diagrams showing jet layout for GLOW Jet Pumps 1 and 2.
Step-by-step instructions for draining and refilling the spa water.
Measures to protect the spa from freezing damage in cold weather.
Comprehensive guide for winterizing the spa for long-term storage.
Steps to follow when opening the spa after winter storage.
Information on the filter system and its importance for spa performance.
Detailed steps for removing and cleaning filter cartridges for optimal filtration.
Guidance on cleaning and maintaining spa pillows for longevity.
Approved cleaning agents and methods for the spa shell surface.
Instructions for cleaning the durable Everwood spa cabinet.
Recommendations for cleaning and conditioning the vinyl spa cover.
Required clearance behind the spa for different cover lifter systems.
Step-by-step guide for safely opening the vinyl spa cover.
Step-by-step guide for safely closing the vinyl spa cover.
Wiring diagram and installation requirements for 230V permanently connected spa models.
Specific wiring and conversion details for the GLEAM model to 230V.
GFCI testing and operational guidelines for 115V BOLT models.
Essential requirements for 115V operation, including dedicated circuits.
Critical warning against extension cords and requirements for proper grounding.
Installation guidelines, GFCI testing, and safety considerations.
Advantages of converting the spa to 230V operation.
Instructions and requirements for converting BOLT models between 115V and 230V.
Wiring diagram for the 230 volt converted BOLT model.
Guidance on service needs and contacting qualified technicians.
Diagnosing issues with GFCI breakers and high-limit thermostat trips.
Information on the No-Fault heater and integrated pressure switch.
Details on the Silent Flo 5000 pump and its thermal cut-off reset.
Covers jet pump thermal overload, wiring, and other service topics.
Actions that will void the spa's limited warranty coverage.
Legal disclaimers and contact information for Watkins Customer Service.
Common operational problems and their respective solutions.
Solutions for common water quality issues like cloudiness and odor.
Technical specifications for GLEAM, PULSE, FLAIR, BOLT, and GLOW models.
To Next Page
General