Hotsy 1265SSD - Shutting down and Clean-Up

16
Operations
Shutting Down And
Clean-up
STEP 1: Remove detergent suction
tube from container and insert into
one gallon of fresh water. Open
detergent mixing valve. Pull trigger
on spray gun and siphon water for
one minute.
STEP 4: Press trigger to release
water pressure.
STEP 7: Engage the spray gun
safety lock.
STEP 2: Turn key to stop position.
Engine shuts down by way of
solenoid.
STEP 5: Disconnect the water
supply from the water inlet on the
machine.
STEP 3: Turn off water supply.
STEP 6: Disconnect the high
pressure hose from pump
discharge fitting.
Safety
Latch
Engine
On-Off
Swit
ch
Water
Hose
Water
Inlet
Coupler
Collar
Discharge
Fitting
Manual Operator HOTSY 1265SSD/S 9.808-057.0 - A