To Next PageTo Next PageWhy Hotsy 800 Pressure Washer has poor or no detergent flow?
Poor or no detergent flow in your Hotsy Pressure Washer can result from: * An inadequate detergent supply. Refill the detergent container, ensure that the pick-up screen is fully immersed, and open the metering valve. * A clogged detergent screen or hose. Clean them, and always start with a clean detergent container. * A clogged detergent valve. Clean the valve.
Why Hotsy 800 Pressure Washer has poor cleaning?
Poor cleaning performance with your Hotsy Pressure Washer may be caused by: * Improper detergent concentration or mixing. Mix the detergent per the manufacturer's instructions and ensure that powdered detergents are fully dissolved. * Using the wrong detergent for the application. Select the appropriate detergent. * Rinsing with hot water. A final rinse with cold water will reduce water spotting.
General| Brand | Hotsy |
|---|---|
| Model | 800 Series |
| Category | Pressure Washer |
| Language | English |
General introduction to safety and owner responsibilities.
Details critical warnings for safe operation and injury prevention.
Advises on preventing freeze damage to the machine.
Warns about ventilation requirements to prevent asphyxiation.
Guidelines for safe electrical connections and grounding.
Provides detailed specifications for different machine models.
Illustrates and names key parts of the pressure washer.
Guides users through unpacking and assembling the machine.
Covers venting, electrode, and burner air adjustments.
Details the steps for starting and operating the pressure washer.
Explains detergent use and effective cleaning methods.
Provides procedures for turning off and cleaning the machine.
Covers proper care, oil changes, and winterization for the pump.
Details on oiling the pump motor and bearing lubrication.
Notes that the relief valve is factory set and not adjustable.
Guidance on draining water and cleaning or replacing the filter element.
Information on de-scaling and de-sooting the heating coil.
Recommends inspecting brake components every 50 hours.
Addresses issues like power supply or switch problems.
Covers causes like clogged nozzles or inadequate water supply.
Deals with issues related to nozzle or air intake.
Troubleshoots problems with the burner or fuel supply.
Addresses issues with detergent supply or clogs.
Diagnoses smoke issues from burner or soot accumulation.
Offers solutions for ineffective cleaning results.
