To Next PageTo Next Page
Need help?Do you have a question about the Hotsy 992SS-208 and is the answer not in the manual?
General| Model | 992SS-208 |
|---|---|
| Power Source | Electric |
| Voltage | 208V |
| Phase | Single |
| Hertz | 60Hz |
| Pressure | 3000 PSI |
| Temperature | 200°F |
| Pump Type | Triplex |
| Pump Material | Ceramic |
| Burner Type | Oil Fired |
| Fuel Type | Diesel |
Defines the user's obligation to understand and follow operating instructions and warnings.
Lists critical safety warnings and precautions for operating the pressure washer.
Illustrates and labels the main parts of the pressure washer for easy recognition.
Guides on unpacking the pressure washer and lists all included parts.
Details the steps for connecting the pressure hose, wand, and attaching the holder.
Provides initial setup guidance, emphasizing proper placement and exhaust venting.
Outlines necessary water flow rates and fuel supply specifications for safe operation.
Details gas pressure requirements and electrical grounding for safe installation.
Covers pre-operation checks, fluid levels, and initial nozzle setup.
Step-by-step guide on how to safely start the machine, including burner ignition.
Explains how to use detergent and proper washing techniques for effective cleaning.
Provides a clear sequence for safely shutting down the pressure washer.
Guides on protecting the machine from freezing and long-term storage.
Instructions on oiling the pump and motor, and proper pump usage.
Covers servicing recommendations for key components like the burner and heating coil.
Lists common symptoms, their possible causes, and corrective actions for the pressure washer.
Illustrates the overall assembly with numbered parts for identification.
Provides a detailed list of parts corresponding to the exploded view diagram.
Details the components of the burner assembly and their part numbers.
Lists all parts for the pump assembly with corresponding part numbers.
Provides the exploded view and parts list for the float tank.
Shows the control panel layout and lists all its components.
Details the hose, trigger gun, and associated parts list.
Illustrates the pump assembly with numbered parts for identification.
Provides a detailed list of parts for the pump assembly.
Illustrates the electrical connections for 3-phase models with electric ignition.
Shows the electrical wiring for 1-phase models with electric ignition.
Outlines the terms and conditions of the manufacturer's limited warranty.
