What to do if my Houghton Cool Top Trail 34 has poor cooling capacity?
If your Houghton Air Conditioner isn't cooling well, make sure the filter is clean. Set the fan speed to high for maximum cooling. Ensure all doors, windows, and the sunroof are closed. Use curtains and awnings to reduce heat. Check that the air openings of the outdoor unit are not blocked.
What does E4 mean on my Houghton Cool Top Trail 34?
If your Houghton Air Conditioner displays 'E4', there's no cooling effect. This could be due to insufficient refrigerant because of a piping fracture, a compressor fault, or sensor failure.
What does E5 mean on my Houghton Cool Top Trail 34?
If your Houghton Air Conditioner displays 'E5', it indicates an outdoor heat exchanger temperature issue. This means the outdoor heat exchanger temperature is too high when cooling, or too low when heating, representing a temperature anomaly.
What to do if water is dripping out of my Houghton Air Conditioner's air distributor?
If water is dripping from your Houghton Air Conditioner's air distributor, unblock the condensate outlets of the outdoor unit and check the seal of the adapter frame. Park the vehicle on a more level surface, with an angle less than 5°. If condensate forms on the outside of the air distributor, increase the fan speed to high.
What to do if my Houghton Air Conditioner is not heating?
If your Houghton Air Conditioner isn't heating, ensure the heating mode is selected and the air distributor display shows the correct symbol. Use the remote to set the temperature higher than the current room temperature. Note that heating may take longer in extremely cold conditions. Also, the unit may automatically enter defrost mode in very low outside temperatures, which will temporarily stop heating and display “dF”. Heating will resume once the outside heat exchanger is clear.
What to do if my Houghton Air Conditioner is not cooling?
If your Houghton Air Conditioner isn't cooling, check that the cooling mode is selected and the air distributor display shows the correct symbol. Use the remote control to set the required temperature below the current room temperature. Note that the compressor will delay a re-start for three minutes.
What does E0 mean on Houghton Cool Top Trail 34 Air Conditioner?
If your Houghton Air Conditioner displays 'E0', it indicates a communication fault.
What does E1 mean on Houghton Air Conditioner?
If your Houghton Air Conditioner displays 'E1', it indicates a room temperature sensor fault.
What does E2 mean on Houghton Air Conditioner?
If your Houghton Air Conditioner displays 'E2', it indicates an indoor heat exchanger temperature sensor fault.
What does E3 mean on Houghton Air Conditioner?
If your Houghton Air Conditioner displays 'E3', it indicates an outdoor heat exchanger temperature sensor fault.
Defines the purpose and scope of the operating and installation instructions provided.
Guidance on how to effectively read and utilize the information within the manual.
Explanation of warning symbols, notes, and highlighting used throughout the document.
Outlines the warranty terms and limitations of liability for product use and installation.
Defines the product's intended application and limitations, specifying where it should and should not be used.
Contains critical warnings, cautions, and essential safety guidelines for operation, installation, and general use.
Outlines the necessary qualifications and certifications for personnel performing installation and maintenance tasks.
Provides foundational advice and general principles for a successful and safe installation process.
Details the necessary prerequisites and conditions for the vehicle's roof and structure for installation.
Explains how to adapt the installation for various roof hatch dimensions or creating new cut-outs.
Guides on selecting the optimal location for the outdoor unit on the vehicle roof, considering airflow and access.
Covers structural reinforcement of the roof cut-out and routing the main electrical power supply.
Details the steps for mounting the adapter frame onto the roof cut-out to prepare for the outdoor unit.
Instructions for physically placing and securing the outdoor unit onto the installed adapter frame.
Guidance on safely connecting the unit to the vehicle's main electrical power supply via the terminal block.
Steps to install the bracket that holds the indoor air distributor assembly securely.
How to properly connect the air inlet duct to the air distributor mounting bracket.
Procedures for installing the indoor air distributor unit itself, including filter and wiring.
Instructions for mounting the holder for the remote control in a convenient location within the vehicle.
Steps to verify all functions are working correctly after the installation is complete.
Essential checks and preparations before operating the air conditioner for the first time.
Tips and factors influencing the unit's performance for heating and cooling, including heat load reduction.
Explains condensation formation, its normality, and measures to manage it during operation.
Guidelines for selecting and operating a generator to power the unit, ensuring mains quality AC power.
Details the remote control's display symbols and operational keys for controlling the unit's functions.
Instructions on how to turn the air conditioner system on and off using the remote control or unit.
How to adjust the desired temperature using the UP/DOWN keys on the remote control.
Procedure for selecting the fan speed level for optimal airflow volume.
Guide to selecting different operational modes like COOL, HEAT, FAN, DRY, and AUTO.
Steps to set the internal clock for accurate timekeeping and enabling timer functions.
How to program the unit to start and stop automatically at specific ON and OFF times.
Steps to enable the programmed timer functions (TIMER ON, TIMER OFF, TIMER ON/OFF).
How to activate the sleep mode for optimized comfort, reduced run time, and noise levels.
How to switch the temperature display between Celsius and Fahrenheit units.
Information on operating and adjusting the brightness of integrated LED lights on the air distributor.
Procedure to reset the remote control to its factory default settings by removing batteries.
How to use the controls directly on the air distributor unit for basic functions like mode selection.
Guide on how to direct and angle the airflow from the unit's louvres for optimal distribution.
Instructions for cleaning and replacing the air return filter to ensure optimal cooling and heating performance.
Guidance on when and how to replace batteries in the remote control when the display is unreadable.
Procedures for checking and retightening mounting bolts for unit tightness and safety.
Recommendations for regular usage to maintain system performance and longevity, running the unit periodically.
How to clean the air conditioner unit, its ventilation grilles, and the surrounding vehicle roof area.
Advice on professional cleaning of heat exchangers annually by a specialist workshop.
Addresses issues where the air distributor screen shows no output when the unit is turned ON.
Troubleshoots problems when the cooling function is not working as expected, checking mode and temperature.
Provides solutions for situations where the heating function fails to operate, checking mode and temperature.
Offers remedies for reduced cooling performance, like dirty filters, blocked outlets, or incorrect fan speed.
Solutions for issues related to water leakage from the air distributor or unit, checking seals and angles.
Explains the meaning of error codes (E0-E5, dF) displayed on the panel and their potential causes.
General| Brand | Houghton |
|---|---|
| Model | Cool Top Trail 34 |
| Category | Air Conditioner |
| Language | English |
To Next Page
