EasyManua.ls Logo

Hover-1 ALPHA CARGO - Before Riding

Hover-1 ALPHA CARGO
27 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
20
Before each use, the E-Scooter operator shall perform the
pre-operation checks as specified below:
• The area that the unit is to be operated in is safe and suitable for
safe operation.
• The braking system is functioning properly.
• All safety labels are in place and understood by the operator.
• Any and all axle guards, chain guards, or other covers and guards
supplied by the manufacturer are in place and in serviceable
condition.
• The tires are in good condition, inflated properly, and have
sufficient tread remaining.
It is important that you fully understand all the functions of your Alpha
Cargo E-Scooter. If these functions are not used correctly, you will not
have full control of your Alpha Cargo.
Practice using your Alpha Cargo at slower speeds in a flat, open
area until you are comfortable riding it.
PRE-RIDE CHECKLIST
Ensure that your Alpha Cargo is in proper working order each time
you ride. If a part of the Alpha Cargo does not function correctly,
please contact our Customer Support Center.
• Ensure the battery is fully charged before riding your E-Scooter.
• Please wear all appropriate safety and protective gear before
operating your E-Scooter.
• Make sure to wear comfortable clothes and flat, closed-toe shoes
when operating your E-Scooter.
BEFORE RIDING
WARNING
Any E-Scooter that does not work
properly can cause you to lose control
and fall. Do not ride an E-Scooter with a
part that is damaged. Replace the
damaged part before riding.