ASSEMBLING YOUR COMET
PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY
FOLDING & UNFOLDING YOUR COMET.
Pull and hold the release lever, near the front of the foot pad, and lift the
handlebars up to unfold or pull them down to fold. You will hear a click sound
in both directions, this means it's now locked in place.
PULL & HOLD THE RELEASE
LEVER TO UNLOCK
OPENING THE KICKSTAND
Locate the kickstand on the left side of the foot pad. Swivel it down
completely so that it supports the scooters weight while you continue
to assemble the scooter.
ATTACHING THE HANDLEBARS
Attach the handle bars by placing them into the appropriate sockets
and twisting them in the correct direction. They should be tight
enough that they will not loosen while riding.
COUNTER-CLOCKWISE
7
COUNTER-CLOCKWISE
To Next Page
Loading...
