RIDING YOUR FLARE
FAILURE TO FOLLOW ANY OF THE FOLLOWING SAFETY PRECAUTIONS
CAN AND MAY LEAD TO DAMAGE TO YOUR FLARE, VOID YOUR
MANUFACTURER WARRANTY, LEAD TO PROPERTY DAMAGE, CAUSE
SERIOUS BODILY INJURY, AND CAN LEAD TO DEATH.
OPERATING YOUR FLARE
Make sure the Flare is fully charged before the first initial use. Before
turning on your Flare, ride it like a normal kick scooter to get
comfortable with the Flare before using it with the motor.
When comfortable riding the scooter, power it on. For the motor to
activate, you must first start riding the scooter and then push the
throttle down. The motor will only activate if you are moving at
I .8mph or more
To slow down the scooter, push the electric brake down. This will stop
the motor and slow you down. Also press the mechanical brake with
your foot to manually slow down the scooter.
The Flare is equipped with a built-in 120 Watt Brushless Motor which
allows you to accelerate (up to 8 mph) and decelerate.
To turn, use the handlebar to turn in the direction you wish to turn.
The Flare can be operated manually if you do not wish to use
the motor.
As you get comfortable on the Flare, you will notice it becomes
easier to maneuver. Remember at higher speeds, it is necessary to
shift your weight to overcome the centrifugal force.
Bend your knees if you encounter bumps or uneven surfaces, then
dismount and carry your Flare to a safe operating surface.
A WARNING
Do not turn sharply or at high speeds to
avoid danger. Do not turn or ride quickly
along slopes, as it may cause injury.
15
To Next Page
Loading...
