Make sure your scooter is turned on. Press the power button three
times, product will beep, product is preset on single Front wheel
mode, the F icon will appear on the display. To exchange from single
front motor, single rear motor or dual drive mode, press the power
button three times.
F icon: Single Front wheel drive
b icon: Single Rear wheel drive
Fb icon: Dual motor drive
Single drive mode:
E: Low speed 9 mph
D: Drive mode 16 mph
Dual motor drive:
E: Low speed 6 mph
D: Drive mode 12 mph
S: Sport mode 19mph
To activate cruise control, long press the throttle down for 5~8
seconds, while riding at a constant speed above 3 mph. You will hear
a beep and the cruise control indicator will light up on the LCD
display indicating that it is activated. Press the throttle down once or
squeeze the brake handle to cancel the cruise control.
For safety reasons, the Journey Max will not accelerate unless it is
already moving at least 1.8 mph (3 km/h). You must push off the
ground with your foot to get the Journey Max moving, then press the
throttle to ride it.
KICK TO START
SINGLE / DUAL DRIVE MODE
CRUISE CONTROL
19
To Next Page
Loading...
