Before each use, the E-Scooter operator shall perform the
pre-operation checks as specified below:
• The area that the unit is to be operated in is safe and suitable for
safe operation.
• The braking system is functioning properly.
• All safety lables are in place and understood by the operator.
• Any and all axle guards, chain guards, or other covers and guards
supplied by the manufacturer are in place and in serviceable
condition.
• The tires are in good condition, inflated properly, and have sufficient
tread remaining.
It is important that you fully understand all the functions of your
Journey Max E-Scooter. If these functions are not used correctly, you
will not have full control of your Journey Max.
Practice using the Journey Max at slower speeds in a flat, open area
before taking it out into public areas.
PRE-RIDE CHECKLIST
Ensure that your Journey Max is in proper working order each time
you ride. If a part of the Journey Max does not function correctly,
please contact our Customer Support Center.
• Ensure the battery is fully charged before riding your E-Scooter.
• Please wear all appropriate safety and protective gear before
operating your E-Scooter.
• Make sure to wear comfortable clothes and flat, closed-toe shoes
when operating your E-Scooter.
BEFORE RIDING
WARNING
Any Journey Max E-Scooter that does
not work properly can cause you to
lose control and fall. Do not ride an
Journey Max with a part that is
damaged. Replace the damaged part
before riding.
20
To Next Page
Loading...
