Hover-1 JOURNEY - Before Riding Checklist; Pre-Operation Checks; Pre-Ride Checklist Items

Before each use, the EScooter operator shall perform the
pre-operation checks as speciied below:
• The area that the unit is to be operated in is safe and suitable for safe
operation.
• The braking system is functioning properly.
• All safety lables are in place and understood by the operator.
• Any and all axle guards, chain guards, or other covers and guards
supplied by the manufacturer are in place and in serviceable condition.
• The tires are in good condition, inlated properly, and have suicient tread
remaining.
It is important that you fully understand all the functions of your Journey
EScooter. If these functions are not used correctly, you will not have full
control of your Journey.
Practice using the Journey at slower speeds in a lat, open area before
taking it out into public areas.
PRE-RIDE CHECKLIST
Ensure that your Journey is in proper working order each time you ride. If a
part of the Journey does not function correctly, please contact our
Customer Support Center.
• Ensure the battery is fully charged before riding your EScooter.
• Please wear all appropriate safety and protective gear before operating
your EScooter.
• Make sure to wear comfortable clothes and lat, closed-toe shoes when
operating your EScooter.
BEFORE RIDING
WARNING
Any Journey EScooter that does not work
properly can cause you to lose control and
fall. Do not ride an Journey with a part that is
damaged. Replace the damaged part
before riding.
20