Hover-1 PIONEER - Warranty Information; Troubleshooting Error Codes

24
WARRANTY
For warranty information, Please visit us at:
www.hover- I .com
Error codes
Error El- motor hall failure, the motor needs to be
replaced
Error E2 - accelerator failure, the accelerator needs
to be replaced
Error code E3 - motor blocking fault, release the
accelerator
Error E4/MOS - mainboard MOS tube failure, the
mainboard needs to be replaced
Error E6 - controller / instrument communication
failure, the controller needs to be replaced
Error E7 - battery over-voltage protection, the battery
needs to be replaced
Error E8 - controller error, the controller needs to be
replaced
Error E9 - brake failure, the brake needs to be replaced
Manufacturer: DGL Group, Ltd.
195 Raritan Center Parkway Edison, NJ 08837
Affix Serial Number Label Here:
24