14 Hoverzon
TM
Cruiser Folding E-Scooter User’s Manual
2.5.3 PROGRAM SETTINGS
To access program settings, press and hold the UP ARROW and DOWN ARROW buttons at the same
time then press the POWER button to cycle between settings. For each setting, use the UP ARROW and
DOWN ARROW buttons to adjust options or levels. To exit settings, simply press and hold the UP ARROW
and DOWN ARROW buttons simultaneously or refrain from pressing any button and the display will time
out and return to the main interface on its own. It is recommended to use the buttons to exit settings
as doing so will save any modifi cations you made. See the following information for details related to
each setting.
P 01: Backlight Brightness Setting
This setting is for display’s backlight brightness. Brightness may be set to 3 different intensities.
P 02: Measurement Setting
This setting determines the unit of measurement in which your current speed is displayed. Speed may
be displayed in either miles per hour (MPH or Mp/h) or kilometers per hour (KPH or Kp/h). By default, this
setting is at 0, with the measurement being kilometers per hour (KPH or Kp/h). If changed, the display
will show the related icon.
P 03: Automatic Shutoff Time Setting
This setting is for the automatic shutoff time. Time may be set to any 5 minute increment between 0
and 60 (i.e. 5 for 5 minutes, 10 for 10 minutes). By default, the timer is set to 10 minutes. Selecting 0 will
turn this feature off.
P 04: Manual Acceleration Start Setting
This setting is related to voltage and effects acceleration. Levels may be set to 0 or 1. By default, this
setting is at 0. Selecting 0 will turn this feature off meaning you may use the throttle to immediately
To Next Page
Loading...