HP 10500 series Datasheet

2
Features and benets
Product architecture
Brings native high stability, independent process monitoring, and restart through the modular
design and multiple processes of HP Comware v7 software; allows individual software modules
to be upgraded for higher availability; and supports enhanced serviceability functions
• In-service software upgrade
Provides an upgrade of the entire chassis or an individual task or process, with zero packet
loss
• Distributed architecture with separation of data and control planes
Delivers enhanced fault tolerance and facilitates continuous operation and zero service
disruption during planned or unplanned control-plane events
• NEW Multitenant device context
Virtualizes a physical switch into multiple logical devices, with each logical switch having its
own processes, conguration, and administration
Performance
• High-speed fully distributed architecture
Provides up to 11.52 Tb/s switching capacity with released line cards and up to 13.72 Tb/s
switching fabric capacity with type-D fabric; leverages its modules to provide non-blocking
wire-speed 10GbE/40GbE performance and future 100GbE expansion capability; utilizes four
fabrics to deliver up to 8.571 billion pps throughput; performs all switching and routing in the
I/O modules; and meets the demand of bandwidth-intensive applications today and in the
future
• Scalable system design
Provides investment protection to support future technologies and higher-speed connectivity
with a backplane designed to accommodate bandwidth increases
• Flexible chassis selection
Enables you to tailor product selections to your budget with a choice of four chassis: the
10504 switch (four open module slots), 10508 switch (eight open module slots), 10508-V
switch (eight vertical open module slots), and 10512 switch (12 open module slots)
Connectivity
• High-density port connectivity
Oers up to 12 interface module slots; provides up to 96 40GbE ports, 576 10GbE ports, and
576 gigabit ber/electrical ports per system
• Jumbo frames
Allows high-performance backups and disaster-recovery systems; and provide a maximum
frame size of 9k bytes
• Loopback
Supports internal loopback testing for maintenance purposes and an increase in availability;
loopback detection protects against incorrect cabling or network congurations and can be
enabled on a per-port or per-VLAN basis for added exibility
• Ethernet operations, administration, and maintenance (OAM)
Detects the data link layer problems that occur in the “last mile,” using the IEEE 802.3ah OAM
standard; and monitors the status of the link between two devices
Data sheet | HP 10500 Switch Series

HP 10500 series Specifications

General

Brand	HP
Model	10500 series
Category	Switch
Language	English