HP 1200 User Manual

10 2 - Using the printer ENWW
Transparencies
z Insert transparencies with the rough side down and the adhesive strip pointing towards the
back of the printer.
z Use the Best mode to print transparencies. This mode provides longer drying time and
ensures that the ink dries completely before the next page is delivered to the output tray.
Allowing wet media to stack up may cause smearing.
Custom-size media
z Use only custom-size media supported by the printer.
z If your application supports custom-size media, set the media size in the application
before printing the document. If not, set the size in the printer driver. You might need to
reformat existing documents to print them correctly on custom-size media.
Understanding specifications for supported media
This section provides information regarding the sizes, types, and weights of media that the
printer supports. It also provides information on the tray capacity.
Note Tray 2 comes with the HP Business Inkjet 1200dtn and HP Business Inkjet 1200dtwn printers.
Understanding supported sizes
Media size Tray 1 Tray 2 Auto-duplex
unit
Standard paper sizes
U.S. Letter*
(216 by 279 mm; 8.5 by 11 inches)
U.S. Legal*
(216 by 356 mm; 8.5 by 14 inches)
A4*
(210 by 297 mm; 8.3 by 11.7 inches)
U.S. Executive*
(184 by 267 mm; 7.25 by 10.5 inches)
U.S. Statement*
(140 by 216 mm; 5.5 by 8.5 inches)
ISO B5*
(176 by 250 mm; 6.9 by 9.8 inches)
A5*
(148 by 210 mm; 5.8 by 8.3 inches)

HP 1200 Specifications

General

Print Technology	Laser
Output Capacity	125 sheets
Connectivity	USB 2.0
Paper Handling	250-sheet input tray
First Page Out	10 seconds
Memory	8 MB
Operating System Compatibility	Windows, Mac OS