ENWW 41
To avoid jams
z Make sure that nothing is blocking the paper path.
z Do not overload the trays. See Understanding specifications for supported media.
z Load paper properly. See Loading media.
z Do not use media that is curled or crumpled.
z Always use media that conforms with specifications. See Selecting print media.
z Make sure the output tray is not overly full when you send a job to print.
z Make sure media is aligned against the right side of the tray.
z Make sure the media length and width guides are adjusted snugly against the media,
but do not crinkle or bend it.
To Next Page
Loading...