Product Warranty
This Hewlett-Packard product has
a warranty against defects in
material and workmanship for a
period of one year from date of
shipment. During the warranty
period, Hewlett-Packard Company
will, at its option, either repair or
replace products that prove to be
defective.
For warranty service or repair, this
product must be returned to a
service facility designated by
Hewlett-Packard.
For products returned to
Hewlett-Packard for warranty
service, the Buyer shall prepay
shipping charges to
Hewlett-Packard and
Hewlett-Packard shall pay shipping
charges to return the product to
the Buyer. However, the Buyer
shall pay all shipping charges,
duties, and taxes for products
returned to Hewlett-Packard from
another country.
Hewlett-Packard warrants that its
software and firmware designated
by Hewlett-Packard for use with an
instrument will execute its
programming instructions when
properly installed on that
instrument. Hewlett-Packard does
not warrant that the operation of
the instrument software, or
firmware will be uninterrupted or
error free.
Limitation of Warranty
The foregoing warranty shall not
apply to defects resulting from
improper or inadequate
maintenance by the Buyer,
Buyer-supplied software or
interfacing, unauthorized
modification or misuse, operation
outside of the environmental
specifications for the product, or
improper site preparation or
maintenance.
No other warranty is
expressed or implied.
Hewlett-Packard specifically
disclaims the implied
warranties of merchantability
or fitness for a particular
purpose.
Exclusive Remedies
The remedies provided herein are
the buyer’s sole and exclusive
remedies. Hewlett-Packard shall
not be liable for any direct,
indirect, special, incidental, or
consequential damages, whether
based on contract, tort, or any
other legal theory.
Assistance
Product maintenance agreements
and other customer assistance
agreements are available for
Hewlett-Packard products.
For any assistance, contact your
nearest Hewlett-Packard Sales
Office.
Certification
Hewlett-Packard Company
certifies that this product met its
published specifications at the
time of shipment from the factory.
Hewlett-Packard further certifies
that its calibration measurements
are traceable to the United States
National Institute of Standards and
Technology, to the extent allowed
by the Institute’s calibration
facility, and to the calibration
facilities of other International
Standards Organization members.
About this edition
This is the first edition of the
HP 16500C/16501A Logic
Analysis Service Guide.
Publication number 16500-97019
Printed in USA.
Edition dates are as follows:
First edition, November 1996
New editions are complete
revisions of the manual. A software
or firmware code may be printed
before the date. This code
indicates the version level of the
software or firmware of this
product at the time the manual or
update was issued. Many product
updates do not require manual
changes; and, conversely, manual
corrections may be done without
accompanying product changes.
Therefore, do not expect a
one-to-one correspondence
between product updates and
manual updates.
To Previous Page
Loading...
Need help?
General
