HP 2510-24 User Manual

3-6
Configuring the Switch
Using the IP Address for Remote Switch Management
Configuring the Switch
For more information on using the web browser interface, please see the
Management and Configuration Guide, which is available on the ProCurve
Networking Web site, www.procurve.com.
An extensive help system is also available for the web browser interface. To
access the help system though the subnet on which the switch is installed you
must have access to the internet.

HP 2510-24 Specifications

General

Switching Capacity	8.8 Gbps
Layer	Layer 2
Jumbo Frame Support	Yes
Ports	24 x 10/100
Management	Web-managed
Operating Temperature	0°C to 45°C
Weight	3.08 kg