HP 2510 Series

Build To Order:
BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or Rack-Shippable solution.
HP 2510-24 Switch J9019B
24 autosensing 10/100 ports
2 RJ-45 10/100/1000 port or an open mini-GBIC slot
min=0 \ max=2 SFP Transceivers
1U - Height
See Configuration
Note:1, 2
HP 2510-48 Switch J9020A
48 autosensing 10/100 ports
2 SFP 100/1000 Mbps ports
min=0 \ max=2 SFP Transceivers
1U - Height
See Configuration
Note:1, 2
HP 2510-48G Switch J9280A
44 autosensing 10/100 ports
4 SFP 100/1000 Mbps ports
min=0 \ max=4 SFP Transceivers
1U - Height
See Configuration
Note:1, 2
Configuration Rules:
Note 1 The following Transceivers install into this switch:
HP X121 1G SFP LC SX Transceiver J4858C
HP X121 1G SFP LC LX Transceiver J4859C
HP X111 100M SFP LC FX Transceiver J9054C
HP X122 1G SFP LC BX-D Transceiver J8177C
HP X112 100M SFP LC BX-D Transceiver J9099B
HP X112 100M SFP LC BX-U Transceiver J9100B
HP X121 1G SFP LC LH Transceiver J4860C
HP X122 1G SFP LC BX-D Transceiver J9142B
HP X122 1G SFP LC BX-U Transceiver J9143A
Note 2 Localization required. (See Localization Menu for list.)
Factory Racked Models
HP 2510-24 Switch J9019B
24 autosensing 10/100 ports
2 RJ-45 10/100/1000 port or an open mini-GBIC slot
min=0 \ max=2 SFP Transceivers
1U - Height
See Configuration
Note:1, 2
HP 2510-24 Factory Integrated Switch J9019BZ
QuickSpecs
HP 2510 Switch Series
Configuration
DA - 12599 Worldwide — Version 18 — November 5, 2013 Page 4