See Configuration
Note:1
Cofiguration Rules:
Note 1
If this Mounting Kit is order with #0D1 or Z then it integrates to the HP Universal Rack. (not the switch)
Note 2
If the J9583A is ordered in EMEA fire the following UNBUILDABLE error:
"The J9583A cannot be ordered with option integrated to the Rack in the EMEA region. The Rack Mount kit must be
ordered as BTO using supplier 8OCZ."
QuickSpecs
HP 2510 Switch Series
Configuration
DA - 12599 Worldwide — Version 18 — November 5, 2013
Page 7
To Next Page
Loading...
