HP 2800

12 2 - Installing accessories ENWW
Installing the auto-duplex unit
You can print on both sides of a sheet of paper automatically when the auto-duplex unit is
installed on the printer. The auto-duplex unit comes with the HP Business Inkjet 2800dt and
HP Business Inkjet 2800dtn printers. For information on using it, see Enabling accessories in
the printer driver and Printing on both sides (duplexing).
To install an auto-duplex unit
1 Push the buttons on both sides of the rear access panel and remove the panel from the
printer.
2 Slide the auto-duplex unit into the printer until the unit locks into place.
Note Do not press the buttons on either side of the auto-duplex unit when installing; use them only
for removing the unit from the printer.
3 Enable the auto-duplex unit in the printer driver. See Enabling accessories in the
printer driver.